
The AirTAC SEJ Adjustable Cylinder SEJ100X100-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø100mm unit covers an effective stroke of 90–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X100-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window, allowing you to dial the retract end from 90 to 100mm. A rod exits both ends, ensuring the annulus area is identical in both directions. This delivers an equal force of 3681 N each way at 0.5 MPa, preventing lopsided push/pull dynamics.
A stop screw on the back rod lets you fine-tune the mechanical end position directly on the machine. You can lock it after setting to match a stop precisely. The extruded aluminum barrel has no external tie rods, and adjustable air cushions at both ends decelerate the load near stroke end. This SKU ships without a magnet, so it cannot host CMSE or DMSE sensors for position feedback.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X100-10 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 10 mm (90–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 10mm retract window to perfectly align sheet metal stop fingers during press brake commissioning, utilizing the 5153 N both-way force to hold the gauge rigidly.
Adjust the effective stroke from 90 to 100mm to accommodate varying carton heights on a packaging line without swapping out the entire cylinder hardware.
Nail the exact pallet end-stop position on a conveyor by turning the back-rod stop screw, locking it once the 3681 N @0.5 MPa push force meets the pallet precisely.
Confirm this 10mm window covers your fine-tuning range; if you need a broader adjustment, consider a larger -NN tail. For sizing both ways: stepping down to a 80mm bore yields 2268 N at 0.5 MPa, while stepping up to a 125mm bore provides 5734 N. If your end position is fixed and never changes, a standard SED double-rod cylinder is sufficient.
This plain SEJ does not hold position on air loss; the adjustable cushion and stop screw decelerate the load and set the mechanical end, but they are not a lock. For fail-safe holding, point to an external rod lock or a BSED. When replacing an ISO 15552 cylinder, match the 100mm bore, 100mm stroke, PT1/2 port, and your mounting choice from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
The retract stroke is adjustable over a 10mm window via a stop screw on the back rod. You can set the effective stroke anywhere from 90mm up to the full 100mm nominal length, then lock it in place.
Because the rod exits both ends, the force is identical in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.