
The AirTAC SEJ Adjustable Cylinder SEJ100X100-100 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø100mm unit covers an effective stroke of 0–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X100-100 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This delivers equal force and speed for extension and retraction, outputting about 3681 N each way at 0.5 MPa.
You can dial the retract end up to 100mm via a stop screw on the back rod, providing an effective stroke range of 0 to 100mm. This allows you to fine-tune the mechanical end position directly on the machine without changing hardware. The extruded aluminum barrel has no external tie rods, and adjustable air cushions at both ends decelerate the load near the stroke ends.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X100-100 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 100 mm (0–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 0-100mm end position for a 3681N pressing assembly, matching material thickness variations without swapping hardware.
Fine-tune the mechanical end position during product changeover, locking the back-rod stop screw precisely for new part dimensions.
Verify the 100mm adjustment window covers your required positioning range. If you need less force, the 80mm bore provides 2268 N at 0.5 MPa; if you need more, the 125mm bore yields 5734 N at 0.5 MPa. If the exact stroke never changes, a fixed-stroke SED cylinder is sufficient. This SKU has no -S magnet, so it will not work with CMSE or DMSE sensors without modification. The adjustable cushion is for deceleration only; for fail-safe position holding on air loss, use an external rod lock or BSED. This PT1/2 ported cylinder is dimensionally interchangeable per ISO 15552.
Quick checklist
The SEJ100X100-100 features a 100mm adjustment window, meaning the effective retract stroke can be dialed from 0mm up to 100mm to fine-tune the end position.
Because it is a double-rod cylinder, force is equal in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.