verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ100X100-10S

The AirTAC SEJ Adjustable Cylinder SEJ100X100-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø100mm unit covers an effective stroke of 90–100mm without changing cylinders. Force is equal in both directions.

  • BoreØ100 mm
  • Nominal stroke100 mm
  • Adjust window10 mm
  • Effective stroke90–100 mm
  • Port sizePT1/2
  • CushionAdjustable, 36 mm
$195.64 $203.14Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ100 stroke, mounting and version on one page All SEJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ100X100-10S

The AirTAC SEJ100X100-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window, allowing you to dial in the retract end position from 90mm to 100mm. Because a rod exits both ends, the annulus area is identical in both directions, yielding an equal force of 3681 N each way at 0.5 MPa. The included -S magnet enables position sensing with CMSE reed or DMSE electronic sensors.

A mechanical stop screw on the back rod sets the precise end position, which you lock down after tuning—ideal for machine commissioning. The extruded aluminum barrel omits external tie rods, and adjustable air cushions at both ends decelerate the load near stroke ends without acting as a fail-safe lock.

Airtac SEJ Adjustable Cylinder SEJ100X100-10S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ100X100-10S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ100 mm
Nominal stroke100 mm
Adjustment window10 mm (90–100 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM20×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø100mm)

PressureForce (both directions)
0.5 MPa3682 N
0.7 MPa5154 N
Max (@1.0 MPa)751 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ100X100-10S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
100Bore size in mm.
×100Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ100X100-10S Is Used

precision_manufacturing

Press Tool Tuning

Dial in the 90-100mm stroke during press commissioning to hit a die precisely, leveraging the 5153 N both-way force at 0.7 MPa.

swap_horiz

Multi-Height Pallet Stops

Adjust the retract stop for different pallet heights on a conveyor changeover without swapping the entire cylinder hardware.

straighten

Guided Clamping

Use the dual rods to resist side loads while clamping heavy components, fine-tuning the exact 10mm clamping position on the machine.

Is the Airtac SEJ Adjustable Cylinder SEJ100X100-10S the Right Cylinder?

Confirm the 10mm adjustment window covers your required end-position range. If you need less force, the 80mm bore provides 2268 N both ways at 0.5 MPa; if you need more, the 125mm bore yields 5734 N both ways. If your stroke never changes, a fixed-stroke SED saves cost. For fail-safe holding on air loss, use an external rod lock. The PT1/2 port and M20x1.5 rod thread match standard ISO 15552 hardware.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ100X100-10S FAQ

The retract end features a mechanical stop screw offering a 10mm adjustment window, allowing the effective stroke to be dialed in from 90mm up to 100mm.

Because the rod exits both ends, force is equal in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ100X100-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ100X100-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.