
The AirTAC SEJ Adjustable Cylinder SEJ100X100-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø100mm unit covers an effective stroke of 80–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X100-20 is a double-acting, double-rod ISO 15552 profile cylinder with a 20mm adjustable retract window, yielding an effective stroke range of 80 to 100mm. A rod exits both ends, meaning the annulus area is identical in both directions.
You dial in the exact retract end-position using a mechanical stop screw on the back rod, then lock it in place—ideal for machine commissioning. This 100mm bore utilizes a PT1/2 port, a 25mm rod with an M20x1.5 thread, and adjustable air cushions at both ends to decelerate heavy loads. This SKU omits the magnet, so it does not support position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X100-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 20 mm (80–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 20mm retract window to perfectly match varying die heights during changeover, using the equal 5153N both-way force at 0.7 MPa to clamp heavy stamping tools.
Fine-tune the mechanical stop position on a conveyor line by adjusting the back-rod screw within the 80-100mm range, securely halting 1000kg pallets without sensor reliance.
Iteratively set precise trial positions for automotive part testing, locking the 25mm double rod to apply a repeatable 3681N test load at 0.5 MPa in both directions.
Verify the 20mm adjustment window covers your required end-position variance, giving a usable 80-100mm stroke. If you need less force, the 80mm bore provides 2268N at 0.5 MPa; if you need more, the 125mm bore offers 5734N at 0.5 MPa. If your stroke never changes, a fixed-stroke SED saves length and cost. Remember, the adjustable cushion and stop screw decelerate the load but do not hold position on air loss—use an external rod lock for fail-safe holding. As a true ISO 15552 cylinder, you can match dimensions by confirming the 100mm bore, 100mm stroke, PT1/2 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 20mm. This creates an effective stroke range of 80-100mm, allowing you to fine-tune the exact end position on the machine without changing hardware. You set it and lock it down.
Because it is a double-rod cylinder, the force is identical in both directions. It delivers 3681N at 0.5 MPa, 5153N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.