
The AirTAC SEJ Adjustable Cylinder SEJ100X100-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø100mm unit covers an effective stroke of 80–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X100-20S is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable retract stroke. A rod exits both ends, yielding equal force in both directions at 3681 N each way at 0.5 MPa. The 20mm stop-screw window on the back rod lets you dial the effective stroke down to 80mm for exact end-position tuning.
This extruded aluminum barrel features field-adjustable air cushions at both ends to manage deceleration over the 36mm cushion length. Equipped with a standard magnet, it supports CMSE reed and DMSE electronic sensors for position feedback. The Ø25mm rod uses an M20x1.5 thread, and the PT1/2 port handles a 30-800 mm/s speed range.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X100-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 20 mm (80–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 20mm retract window to match varying die heights during press setup. The 5153 N both-way force at 0.7 MPa securely shifts heavy tooling plates.
Adjust the mechanical end position on the fly for different package sizes.
Fine-tune the 80-100mm effective stroke to set precise electrode gaps. The M20x1.5 rod thread handles high side loads while the magnet tracks position.
Verify the 20mm adjustment window covers your required positioning range, giving an effective 80-100mm stroke. For sizing, the adjacent bore down is 80mm providing 2268 N both ways at 0.5 MPa, while stepping up to 125mm yields 5734 N. If you do not need variable end positions, a fixed-stroke SED cylinder is sufficient. Note that the air cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock. Match ISO 15552 replacements by confirming the 100mm bore, 100mm stroke, PT1/2 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke by up to 20mm. For this SEJ100X100-20S model, the effective stroke range is 80-100mm. You dial the end position during commissioning and lock the screw in place.
Because it is a double-rod cylinder, the force is identical in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.