verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ100X100-40S

The AirTAC SEJ Adjustable Cylinder SEJ100X100-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø100mm unit covers an effective stroke of 60–100mm without changing cylinders. Force is equal in both directions.

  • BoreØ100 mm
  • Nominal stroke100 mm
  • Adjust window40 mm
  • Effective stroke60–100 mm
  • Port sizePT1/2
  • CushionAdjustable, 36 mm
$195.64 $203.14Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ100 stroke, mounting and version on one page All SEJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ100X100-40S

The AirTAC SEJ100X100-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40 mm adjustable stroke window, allowing the retract end to be dialed in for an effective stroke range of 60 to 100 mm. A rod exits both ends, ensuring the annulus area remains identical in both directions, yielding an equal force of 3681 N each way at 0.5 MPa.

A stop screw on the back rod mechanically shortens the retract stroke, letting you fine-tune the end position directly on the machine before locking it down. This 100 mm bore cylinder includes a -S magnet for CMSE reed or DMSE electronic sensors, uses a PT1/2 port, and relies on field-adjustable air cushions at both ends for deceleration.

Airtac SEJ Adjustable Cylinder SEJ100X100-40S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ100X100-40S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ100 mm
Nominal stroke100 mm
Adjustment window40 mm (60–100 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM20×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø100mm)

PressureForce (both directions)
0.5 MPa3682 N
0.7 MPa5154 N
Max (@1.0 MPa)751 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ100X100-40S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
100Bore size in mm.
×100Nominal stroke length in mm.
-40Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ100X100-40S Is Used

precision_manufacturing

Press Stroke Dial-In

Dial in the exact 60-100 mm retract position on a stamping press, utilizing the 3681 N both-way force to securely clamp varying material thicknesses without repositioning hardware.

swap_horiz

Packaging Changeover

Adjust the mechanical stop on the fly during packaging line changeovers to accommodate different box sizes, locking the back-rod screw precisely for each new part height.

factory

Welding Positioning

Fine-tune the electrode extension on a spot welding gun within the 40 mm window, matching the exact panel gap while the equal both-way thrust maintains stable contact pressure.

Is the Airtac SEJ Adjustable Cylinder SEJ100X100-40S the Right Cylinder?

Verify the 40 mm adjustment window covers your positioning range; if you need less fine-tune travel, a fixed-stroke SED might suffice. For sizing both ways: step down to an 80 mm bore for 2268 N both-way force at 0.5 MPa, or step up to a 125 mm bore for 5734 N. The plain SEJ does not hold position on air loss—the stop screw sets the mechanical end but is not a fail-safe rod lock; for holding, use an external lock. Dimensionally interchangeable per ISO 15552, match your bore, stroke, port, and mounting (Basic, FA, LB, TC, FTC, TCM1, TCM2).

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (40mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 40mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ100X100-40S FAQ

The cylinder has a nominal 100 mm stroke with a 40 mm adjustment window. You can dial the retract end to achieve an effective stroke ranging from 60 mm up to 100 mm by turning the stop screw on the back rod.

Because the rod exits both ends, force is equal in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ100X100-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ100X100-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.