
The AirTAC SEJ Adjustable Cylinder SEJ100X100-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø100mm unit covers an effective stroke of 50–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X100-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions for an equal force of 3681 N each way at 0.5 MPa. You can mechanically dial the retract stroke down from the 100mm nominal to a 50mm effective length using the back-rod stop screw.
This design allows precise end-position tuning directly on the machine without swapping hardware. The extruded aluminum barrel includes field-adjustable air cushions at both ends to decelerate the load near stroke end. This SKU has no magnet, meaning CMSE or DMSE position sensors will not function without a rod upgrade. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X100-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 50 mm (50–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 50mm retract window to accommodate varying part heights during press changeovers, utilizing the 5153 N both-way force at 0.7 MPa to form components.
Adjust the retract stroke to set precise cut lengths on a flying cutoff saw, relying on the equal push and pull forces to maintain blade tracking.
Fine-tune the end-of-stroke stop during commissioning to match carton dimensions exactly, locking the back-rod stop screw once the position is set.
Verify the 50mm adjustment window covers your required end-position range. If you need less force, stepping down to an 80mm bore yields 2268 N each way at 0.5 MPa; stepping up to 125mm provides 5734 N. If your stroke length is fixed and never requires changeover, a standard SED double-rod cylinder provides the same equal-force output without the adjustment mechanism.
For fail-safe load holding, note that the adjustable stop screw and air cushions only set the mechanical end and decelerate the load; they do not lock position on air loss. For secure holding, use an external rod lock or a BSED series cylinder. When replacing an ISO 15552 cylinder, match the 100mm bore, 100mm stroke, 50mm window, PT1/2 port, and required mounting kit.
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 50mm. The effective stroke range is 50mm to 100mm, allowing you to dial in the exact end position and lock it down without changing hardware.
Because it is a double-rod cylinder, the force is identical in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.