
The AirTAC SEJ Adjustable Cylinder SEJ100X100-75S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø100mm unit covers an effective stroke of 25–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X100-75S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 75mm adjustable stroke window. A rod exits both ends, yielding an equal drive force of 3681N each way at 0.5MPa. You can dial the retract end from 25mm up to the 100mm nominal stroke.
A stop screw on the back rod lets you mechanically fine-tune the end position during commissioning without swapping hardware. The extruded aluminum barrel omits external tie rods, and the built-in magnet supports CMSE reed and DMSE electronic sensors for position feedback.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X100-75S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 75 mm (25–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the retract stroke from 25 to 100mm to accommodate varying material thicknesses in a press line, utilizing the 5153N both-way force to actuate heavy forming dies.
Apply equal clamping pressure from both ends on a wood panel processing conveyor.
Fine-tune the mechanical end stop during commissioning of a heavy-duty packaging machine. The 75mm window lets operators match the exact sealing position without changing the cylinder mount.
This 100mm bore delivers 5153N both ways at 0.7MPa. If your load needs less force, step down to the 80mm bore (2268N at 0.5MPa); if you need more, move up to the 125mm bore (5734N at 0.5MPa). The 75mm adjustment window is ideal for dialing in variable stops across different part heights.
The field-adjustable air cushion at both ends decelerates the load near stroke end but does not hold position on air loss. For fail-safe holding, use an external rod lock or a BSED cylinder. Ensure your ISO 15552 replacement matches the PT1/2 port, M20x1.5 rod thread, and 25mm rod diameter.
Quick checklist
A stop screw on the back rod lets you shorten the retract stroke within a 75mm window. The effective stroke range is 25mm to 100mm, which you lock in place after setting the exact machine end position.
Because the rod exits both ends, the annulus area is identical in both directions. It provides 3681N at 0.5MPa, 5153N at 0.7MPa, and a maximum of 751kgf at 1.0MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.