
The AirTAC SEJ Adjustable Cylinder SEJ100X125-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø100mm unit covers an effective stroke of 75–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X125-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas and an equal drive force of 3681 N each way at 0.5 MPa. You can dial the retract end from 75 mm up to the nominal 125 mm.
A mechanical stop screw on the back rod lets you set the exact retract position during machine commissioning. The extruded aluminum barrel omits external tie rods, and adjustable air cushions at both ends decelerate the 25 mm rods over a 36 mm length. This standard SKU lacks a magnet, so it carries no CMSE or DMSE position sensor.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X125-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 50 mm (75–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 75-125 mm retract window to set precise upper die heights during press calibration, utilizing the 5153 N both-way force to seat heavy tooling.
Adjust the mechanical stop to accommodate different carton depths on a packaging line, locking the back-rod screw to match the new format precisely.
Fine-tune the retract position to align varying pallet widths, relying on the equal double-rod force to pull the gantry back consistently.
Verify the 50 mm window covers your target end-position range. If you need less push, the 80 mm bore delivers 2268 N both ways at 0.5 MPa; if you need more, stepping up to 125 mm provides 5734 N. Choose the fixed-stroke SED if the retract distance never varies. For fail-safe holding on air loss, add an external rod lock, as the stop screw and cushions only set the mechanical end and decelerate near stroke end. To match this ISO 15552 cylinder for replacement, confirm the 100 mm bore, 125 mm stroke, PT1/2 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 50 mm window. You can dial the effective stroke from 75 mm up to the nominal 125 mm, then lock the screw to hold that exact end position.
Because the double-rod design yields equal annulus areas, the force is identical in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.