verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ100X150-100S

The AirTAC SEJ Adjustable Cylinder SEJ100X150-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø100mm unit covers an effective stroke of 50–150mm without changing cylinders. Force is equal in both directions.

  • BoreØ100 mm
  • Nominal stroke150 mm
  • Adjust window100 mm
  • Effective stroke50–150 mm
  • Port sizePT1/2
  • CushionAdjustable, 36 mm
$210.99 $218.49Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ100 stroke, mounting and version on one page All SEJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ100X150-100S

The AirTAC SEJ100X150-100S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, making the annulus area identical in both directions for an equal force of 3681 N each way at 0.5 MPa. A stop screw on the back rod provides a 100 mm adjustable stroke window, allowing the effective retract stroke to be dialed anywhere from 50 mm up to 150 mm.

This extruded aluminum barrel design omits external tie rods for a clean profile. It includes field-adjustable air cushions at both ends to manage kinetic energy, and the -S magnet option enables position sensing with CMSE reed or DMSE electronic sensors. The overall length is longer than a fixed-stroke SED to accommodate the rear adjustment mechanism.

Airtac SEJ Adjustable Cylinder SEJ100X150-100S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ100X150-100S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ100 mm
Nominal stroke150 mm
Adjustment window100 mm (50–150 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM20×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø100mm)

PressureForce (both directions)
0.5 MPa3682 N
0.7 MPa5154 N
Max (@1.0 MPa)751 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ100X150-100S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
100Bore size in mm.
×150Nominal stroke length in mm.
-100Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ100X150-100S Is Used

precision_manufacturing

Press Die Clearance

Dial in the exact 50-150 mm retract distance when changing press dies of varying heights, using the 5153 N both-way force at 0.7 MPa to clamp and release heavy tooling.

swap_horiz

Packaging Changeover

Adjust the retract stop on the fly to accommodate different carton sizes on a packaging line, relying on the equal double-rod force to push and pull the folding mechanism.

factory

Material Feed Trial

Set the exact material push length during line commissioning, fine-tuning the 100 mm window to find the optimal feed position before locking the stop screw.

Is the Airtac SEJ Adjustable Cylinder SEJ100X150-100S the Right Cylinder?

Verify your end-position tuning requires the full 100 mm window; if a smaller 20 mm trim is enough, a SEJ100X150-20 saves space. This 100 mm bore delivers 3681 N both ways at 0.5 MPa. Stepping down to an 80 mm bore drops the both-way force to 2268 N, while stepping up to a 125 mm bore raises it to 5734 N. If your stroke never changes after commissioning, a fixed-stroke SED100X150 is simpler.

The adjustable air cushion decelerates the load near stroke ends but does not lock or hold position on air loss; for fail-safe holding, specify a BSED or an external rod lock. When replacing an ISO 15552 cylinder, match the 100 mm bore, 150 mm stroke, PT1/2 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (100mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 100mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ100X150-100S FAQ

A stop screw on the rear protruding rod lets you mechanically shorten the retract stroke by up to 100 mm. The effective stroke range is 50 to 150 mm, which you set and lock during machine commissioning.

Because the double-rod design creates equal annulus area both ways, it outputs 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa in both extend and retract directions.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ100X150-100S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ100X150-100S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.