
The AirTAC SEJ Adjustable Cylinder SEJ100X150-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø100mm unit covers an effective stroke of 140–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X150-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring an adjustable retract stroke. A rod exits both ends, yielding identical annulus areas, so you generate equal force in both directions at 3681 N each way at 0.5 MPa. The integrated stop screw on the back rod lets you dial the retract end up to 10 mm, creating an effective stroke range of 140-150 mm for precise machine commissioning.
This extruded aluminum barrel design omits external tie rods for a clean profile. It includes field-adjustable air cushions at both ends to manage deceleration over the 36 mm cushion length. The built-in magnet (-S) supports CMSE reed and DMSE electronic sensors for end-of-stroke detection, while the PT1/2 ports and M20x1.5 rod threads handle robust pneumatic connections.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X150-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 10 mm (140–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 140-150 mm end position for a stamping press, utilizing the 5153 N both-way force to securely form sheet metal without overtravel.
Fine-tune the clamping distance on a metal straightening fixture, using the 10 mm back-rod stop screw to match varying part thicknesses precisely.
Adjust the retract stop for different pallet heights on a conveyor line, relying on the equal both-way thrust to move heavy loads consistently.
Confirm this 10 mm adjustment window covers your positioning tolerance before ordering. If your application requires less force, stepping down to the 80 mm bore yields 2268 N at 0.5 MPa; if you need more power, the 125 mm bore provides 5734 N. If the stroke never varies after commissioning, a fixed-stroke SED cylinder is sufficient. For drop-prevention safety, note that this cylinder does not hold position on air loss—use an external rod lock or BSED series for fail-safe holding.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 150 mm nominal stroke, 10 mm window, PT1/2 port, and your specific mounting from the available Basic, FA, LB, TC, FTC, TCM1, or TCM2 options. Since the 150 mm stroke is under 300 mm, side-load stress is minimal, but you should still ensure external guides support heavy tooling attached to the rod ends.
Quick checklist
The SEJ100X150-10S features a 10 mm adjustment window via a stop screw on the back rod. You can mechanically dial the retract stroke from 140 mm up to the nominal 150 mm to fine-tune the machine end position.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.