verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ100X150-30S

The AirTAC SEJ Adjustable Cylinder SEJ100X150-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø100mm unit covers an effective stroke of 120–150mm without changing cylinders. Force is equal in both directions.

  • BoreØ100 mm
  • Nominal stroke150 mm
  • Adjust window30 mm
  • Effective stroke120–150 mm
  • Port sizePT1/2
  • CushionAdjustable, 36 mm
$210.99 $218.49Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ100 stroke, mounting and version on one page All SEJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ100X150-30S

The AirTAC SEJ100X150-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring an adjustable retract stroke. A rod exits both ends, yielding identical annulus areas so the drive force is perfectly equal in both directions at 3681 N at 0.5 MPa. The integrated stop screw on the back rod lets you dial the retract end position over a 30 mm window, creating an effective stroke range of 120 to 150 mm.

This design eliminates the need for physical shims or swapping hardware during commissioning. You simply set the precise end position and lock the mechanism down. It includes a magnet for CMSE or DMSE sensors and features field-adjustable air cushions at both ends to decelerate heavy loads smoothly near the stroke limits.

Airtac SEJ Adjustable Cylinder SEJ100X150-30S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ100X150-30S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ100 mm
Nominal stroke150 mm
Adjustment window30 mm (120–150 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM20×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø100mm)

PressureForce (both directions)
0.5 MPa3682 N
0.7 MPa5154 N
Max (@1.0 MPa)751 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ100X150-30S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
100Bore size in mm.
×150Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ100X150-30S Is Used

precision_manufacturing

Press Tonnage Calibration

Dial in the exact 120-150 mm end position during stamping press setup. The 5153 N both-way force at 0.7 MPa securely holds the die plate while fine-tuning the stroke gap.

swap_horiz

Multi-Height Pallet Changeover

Adapt a packaging line to different pallet thicknesses instantly. The 30 mm retract window lets you reposition the 3681 N clamping face without changing cylinder hardware.

settings

Robotic Gripper Alignment

Fine-tune the retracted home position of a heavy material handling gripper. The double-rod construction resists torsional side load while the stop screw locks the precise end point.

Is the Airtac SEJ Adjustable Cylinder SEJ100X150-30S the Right Cylinder?

Confirm this 30 mm adjustment window covers your required positioning range. If you need less force, stepping down to the 80 mm bore provides 2268 N at 0.5 MPa both ways. If your application requires more power, the 125 mm bore offers 5734 N at 0.5 MPa. For fixed-position tasks that never require end-tuning, a standard SED double-rod cylinder is sufficient. Note that a plain SEJ does not hold position on air loss; the stop screw sets the mechanical end but is not a fail-safe rod lock.

When replacing an ISO 15552 cylinder, match the 100 mm bore, 150 mm nominal stroke, PT1/2 port, and your required mounting bracket from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the overall length is longer than a double-rod cylinder to house the back rod and adjuster, verify your machine envelope has adequate depth.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ100X150-30S FAQ

The retract stroke can be mechanically adjusted over a 30 mm window using the back-rod stop screw. The effective stroke range is 120 to 150 mm. You set the exact end position on the machine and lock it down, avoiding the need for custom shims.

Because the rod exits both ends, the annulus area is identical in both directions, yielding equal force. This 100 mm bore cylinder provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ100X150-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ100X150-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.