
The AirTAC SEJ Adjustable Cylinder SEJ100X150-40 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø100mm unit covers an effective stroke of 110–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X150-40 is a double-acting, double-rod ISO 15552 profile cylinder with a 40 mm mechanical stroke-adjustment window. A stop screw on the rear rod lets you dial the retract end position back, yielding an effective stroke range of 110 to 150 mm without changing hardware.
This 100 mm bore pneumatic actuator features an extruded aluminum barrel and field-adjustable air cushions at both ends to manage deceleration. It uses a PT1/2 port and a Ø25 mm rod with an M20x1.5 thread. Note that this specific SKU omits the magnet, so it does not support CMSE or DMSE position sensors out of the box.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X150-40 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 40 mm (110–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 110-150 mm retract position during press setup, using the 5153 N both-way force at 0.7 MPa to clamp varying material thicknesses precisely.
Quickly adjust the mechanical stop for different carton heights on a packaging line, shifting the effective stroke within the 40 mm window without swapping cylinders.
Fine-tune the electrode landing distance on a robotic welder, leveraging the equal extend and retract forces to maintain consistent pressure on the workpiece.
Choose this 100 mm bore actuator when you need 3681 N of both-way force at 0.5 MPa (5153 N at 0.7 MPa) with on-machine fine-tuning over a 40 mm window. If your application requires less force, the neighboring 80 mm bore provides 2268 N at 0.5 MPa; if you need more, the 125 mm bore offers 5734 N. If your end position never changes, a fixed-stroke SED cylinder is a simpler alternative.
For direct ISO 15552 replacement matching, verify the 150 mm nominal stroke, the 40 mm adjustment window, PT1/2 porting, and your required mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Remember that the adjustable air cushion only decelerates the load near the end of stroke; it is not a mechanical lock, and the cylinder will not hold position on air loss.
Quick checklist
A stop screw on the rear rod mechanically limits the retract stroke. You can adjust it up to 40 mm, giving an effective stroke range of 110 to 150 mm. Once set, you lock the screw in place on the machine.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.