
The AirTAC SEJ Adjustable Cylinder SEJ100X150-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø100mm unit covers an effective stroke of 100–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X150-50S is a double-acting, double-rod ISO 15552 profile cylinder with a 50mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so thrust is equal in both directions at 3681 N at 0.5 MPa. The effective stroke range is 100-150mm.
A stop screw on the back rod lets you mechanically shorten the retract end by up to 50mm. This is ideal for fine-tuning a specific end position on the machine without swapping hardware. The extruded aluminum barrel has no external tie rods, and the included -S magnet enables CMSE or DMSE electronic sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X150-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 50 mm (100–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 100-150mm closing height on a 3681N press during tool changeovers without machining spacers.
Adjust the retract stop on a conveyor diverter arm to handle different carton lengths on the fly.
Fine-tune the end position during line commissioning, locking the back-rod screw once the optimal 100mm stroke is found.
Confirm the 50mm adjustment window covers your positioning range. If you need less force, the 80mm bore delivers 2268 N both ways at 0.5 MPa; if you need more, the 125mm bore provides 5734 N. If your end stop never changes, a fixed-stroke SED is sufficient. For fail-safe position holding on air loss, use a BSED or an external rod lock. This ISO 15552 cylinder matches replacements by 100mm bore, 150mm stroke, PT1/2 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
A stop screw on the back rod lets you dial the retract stroke down by up to 50mm. The effective stroke range is 100-150mm. You lock the screw after setting the exact end position.
Because the double-rod design yields equal annulus areas, force is identical both ways: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.