
The AirTAC SEJ Adjustable Cylinder SEJ100X155-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø100mm unit covers an effective stroke of 135–155mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X155-20S is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable stroke. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 3681 N each way at 0.5 MPa. A rear stop screw lets you dial the retract stroke over a 20 mm window, providing an effective stroke range of 135-155 mm for precise machine commissioning.
This extruded aluminum barrel design includes field-adjustable air cushions at both ends and a built-in magnet for CMSE reed or DMSE electronic sensors. The PT1/2 port and M20x1.5 rod thread handle high flow and secure mounting. The back rod can carry a cam or flag, and the cylinder supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X155-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 155 mm |
| Adjustment window | 20 mm (135–155 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×155 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 135-155 mm stroke to set precise lower-die heights on a hydraulic press, utilizing the 5153 N both-way force at 0.7 MPa to move heavy tooling.
Adjust the retract stop to accommodate varying cardboard case sizes on a packaging line without swapping hardware, relying on equal push and pull forces.
Fine-tune the mechanical end stop for different lumber lengths on an outfeed conveyor, using the rear rod to trigger a DMSE electronic sensor.
Confirm the 20 mm adjustment window covers your positioning range before ordering. If your application needs less force, stepping down to the 80 mm bore yields 2268 N at 0.5 MPa both ways; if you require more, the 125 mm bore provides 5734 N at 0.5 MPa. If you do not need variable end-positioning, a fixed-stroke SED cylinder is sufficient. For matching an ISO 15552 replacement, verify the 155 mm stroke, 20 mm window, PT1/2 port, and magnet option.
Note that a plain SEJ does not hold position on air loss. The adjustable air cushion and stop screw only set the mechanical end and decelerate the load near stroke end; they are not a lock or brake. For fail-safe holding, use an external rod lock. Because the stroke is under 300 mm, side-load stress is minimal, but external guides are still recommended for heavy loads.
Quick checklist
The retract stroke is adjustable over a 20 mm window. The effective stroke ranges from 135 mm to 155 mm. You set the exact end position using a stop screw on the back rod and lock it in place after commissioning.
Because the rod exits both ends, the force is equal in both directions. It generates 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.