
The AirTAC SEJ Adjustable Cylinder SEJ100X160-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø100mm unit covers an effective stroke of 110–160mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X160-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm mechanical stroke adjustment. A rod exits both ends, yielding identical annulus areas so output is equal in both directions at 3681 N (0.5 MPa) and 5153 N (0.7 MPa). The retract end stop screw lets you dial the effective stroke down from 160 mm to 110 mm.
This unit uses a PT1/2 port and a Ø25 mm rod with an M20x1.5 thread. Adjustable air cushions at both ends decelerate the heavy 751 kgf max load near stroke end. It carries no magnet, so position sensing is not available on this SKU.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X160-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 160 mm |
| Adjustment window | 50 mm (110–160 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×160 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivering 5153 N of equal both-way force at 0.7 MPa, this cylinder dials in the exact 110-160 mm clamp stroke during stamping press commissioning to match varying die heights.
Adjust the retract stop by up to 50 mm to rapidly switch end positions for different carton sizes, using the 751 kgf max output to securely shift heavy product lanes.
Fine-tune the 160 mm stroke down to 110 mm to set precise electrode contact depth on automated welding lines without swapping the entire cylinder assembly.
Verify the 50 mm window covers your required end-position variance, giving an effective 110 to 160 mm stroke. If you need less force, the 80 mm bore provides 2268 N at 0.5 MPa; if you need more, the 125 mm bore yields 5734 N both ways. For fixed-position tasks without end-tuning, a standard SED double-rod cylinder suffices.
The stop screw and air cushions set mechanical ends and decelerate motion, but a plain SEJ does not hold position on air loss—use an external rod lock for fail-safe clamping. As a dimensionally interchangeable ISO 15552 unit, match the bore, port, and mounting (Basic, FA, LB, TC, FTC, TCM1, TCM2) for direct machine replacement.
Quick checklist
A mechanical stop screw on the rear rod lets you shorten the retract stroke by up to 50 mm. This gives an effective stroke range of 110 to 160 mm, allowing you to fine-tune the end position on the machine. Lock the screw after setting your desired position.
Because it is a double-rod cylinder, force is equal in both directions. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.