
The AirTAC SEJ Adjustable Cylinder SEJ100X225-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø100mm unit covers an effective stroke of 175–225mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X225-50 is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable retract stroke. A rod exits both ends, yielding identical annulus areas and equal force in both directions—delivering 3681 N each way at 0.5 MPa and 5153 N at 0.7 MPa. The extruded aluminum barrel contains no external tie rods, ensuring clean ISO 15552 dimensional interchangeability.
A mechanical stop screw on the back rod provides a 50mm adjustment window, allowing you to dial the effective stroke down from 225mm to 175mm. This SKU lacks a magnet (-S), so it carries no CMSE or DMSE position sensors. It features a Ø25mm rod, M20x1.5 thread, PT1/2 ports, and field-adjustable air cushions at both ends to decelerate loads near the stroke ends.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X225-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 225 mm |
| Adjustment window | 50 mm (175–225 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×225 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 175-225mm stroke to hit a forming die precisely during setup. The 5153N both-way force at 0.7 MPa ensures stable clamping without asymmetric drift.
Switch between different carton heights on a packaging line. Adjust the 50mm window on the machine to match the new stop position without swapping hardware.
Fine-tune the ejection stroke on an assembly conveyor. The equal push/pull force prevents skewing when repositioning heavier workpieces.
Confirm this 50mm window covers your required end-position range. If you need less force, the 80mm bore delivers 2268 N both ways at 0.5 MPa; if you need more, the 125mm bore yields 5734 N. If your stroke never varies, a fixed-stroke SED avoids the extra length of the back rod. Remember, the adjustable cushion and stop screw decelerate and set the mechanical end but do not hold position on air loss—for fail-safe holding, use an external rod lock or BSED. Match your replacement by bore, stroke, window, PT port, and mounting (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
The SEJ100X225-50 has a 50mm adjustment window via a stop screw on the back rod. You can mechanically dial the retract stroke from the nominal 225mm down to 175mm, giving an effective range of 175-225mm. Lock the screw after setting your exact end position.
Because the double-rod design yields equal annulus areas, the force is identical in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.