
The AirTAC SEJ Adjustable Cylinder SEJ100X25-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø100mm unit covers an effective stroke of 15–25mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X25-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a mechanically adjustable retract stroke. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 3681 N each way at 0.5 MPa. The integrated stop screw on the back rod lets you dial the retract end position over a 10 mm window, providing an effective stroke range of 15 to 25 mm.
This bore 100 mm unit features a PT1/2 port, a 25 mm rod with an M20x1.5 thread, and field-adjustable air cushions at both ends to manage deceleration. The included magnet (-S) supports CMSE reed and DMSE electronic sensors for position feedback. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X25-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 25 mm |
| Adjustment window | 10 mm (15–25 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×25 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 10 mm window to precisely set a 100 mm bore pin insertion depth. The 5153 N both-way force at 0.7 MPa ensures consistent penetration without re-mounting hardware.
Adjust the retract end from 15 to 25 mm to accommodate varying box heights on a packaging line, leveraging equal push and pull forces for stable flap folding.
Fine-tune a clamping end stop during machine commissioning. The stop screw locks down the exact position while the double-rod design resists rotational torque.
Confirm this 10 mm adjustment window covers your exact end-position range, yielding an effective 15 to 25 mm stroke. If you need less force, the 80 mm bore delivers 2268 N at 0.5 MPa both ways; stepping up is not an option as 100 mm is the second largest standard size, delivering 5153 N at 0.7 MPa. If the retract position never changes after commissioning, a fixed-stroke SED cylinder is sufficient. Note that a plain SEJ does not hold position on air loss; the stop screw only sets the mechanical end and is not a fail-safe rod lock. Ensure your ISO 15552 replacement matches the 25 mm stroke, PT1/2 port, and desired mounting hardware.
Quick checklist
The SEJ100X25-10S has a 10 mm adjustment window via a stop screw on the back rod. You can dial the retract stroke from 15 mm up to the nominal 25 mm, then lock it in place.
Because it is a double-rod cylinder, force is equal both ways: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.