
The AirTAC SEJ Adjustable Cylinder SEJ125X100-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø125mm unit covers an effective stroke of 70–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X100-30 is a double-acting, double-rod ISO 15552 profile cylinder engineered for heavy-duty positioning. A precision stop screw on the back rod lets you dial the retract stroke up to 30 mm, yielding an effective stroke range of 70-100 mm. This allows exact end-position tuning during machine commissioning without swapping hardware.
The extruded aluminum barrel contains no external tie rods, and field-adjustable air cushions at both ends decelerate the 32 mm rod over a 40 mm cushion length. This SKU has no internal magnet, so position sensing is not available.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X100-30 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 30 mm (70–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 70-100 mm stroke on metal stamping presses to accommodate different die heights, utilizing the 5734 N both-way force for reliable clamping.
Adjust the retract end-stop on heavy material bending machines to switch between part lengths without changing the cylinder hardware.
Precisely set the mechanical end position during machine commissioning to align heavy conveyors or stops, locking the 30 mm window once aligned.
This 125 mm bore provides 5734 N both ways at 0.5 MPa; if your load is lighter, step down to the 100 mm bore for 3681 N, or step up if you need more than the 1.0 MPa maximum of 1169 kgf. The 30 mm adjustment window is ideal for fine-tuning a press or stop position. If you do not need variable stroke, a fixed-stroke SED saves space. Note that the air cushion and stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, use an external rod lock or BSED. With a 100 mm stroke, external guides are recommended to manage side loads. The PT1/2 port and M27x2 rod thread match standard ISO 15552 mounting dimensions.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
The retract stroke can be mechanically dialed up to 30 mm using the back-rod stop screw, giving an effective stroke range of 70-100 mm. You lock the screw after setting the exact end position.
Because the rod exits both ends, force is equal in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.