
The AirTAC SEJ Adjustable Cylinder SEJ125X75-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø125mm unit covers an effective stroke of 65–75mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X75-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window. You can dial the retract end from 65mm to 75mm to perfectly dial in a machine stop.
This extruded aluminum barrel design includes a built-in magnet for CMSE reed or DMSE electronic sensors. The field-adjustable air cushion at both ends decelerates the 32mm rod near stroke ends, while the back-rod stop screw lets you lock the exact end position after fine-tuning.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X75-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 75 mm |
| Adjustment window | 10 mm (65–75 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×75 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 65-75mm retract stop to accommodate different part heights during press tool changeover, utilizing the full 5734 N both-way force at 0.5 MPa to clamp securely.
Fine-tune the end position of a heavy conveyor stop block by 10mm during commissioning, locking the back-rod screw precisely where the 8028 N retract force halts the workpiece.
Set exact 65-75mm trial positions for material testing rigs, relying on the equal push and pull forces to apply consistent pressure and deceleration via the 40mm adjustable cushion.
The 10mm adjustment window is perfect for commissioning fine-tune applications where you need to hit a precise 65-75mm end position. Stepping down to the 100mm bore yields 3681 N at 0.5 MPa, while this 125mm bore provides 5734 N at 0.5 MPa and a maximum of 1169 kgf at 1.0 MPa. If your stroke length is absolutely fixed, a standard SED double-rod cylinder is sufficient.
This plain cylinder does not hold position on air loss; the adjustable cushion and stop screw only set the mechanical end and decelerate, so use an external rod lock for fail-safe holding. When matching an ISO 15552 replacement, verify the 75mm stroke, 10mm window, PT1/2 port, and your required mounting from the available Basic, FA, LB, TC, FTC, TCM1, and TCM2 set.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
The 10mm adjustment window lets you mechanically dial the retract stroke from 65mm up to 75mm. You set the exact end position using a stop screw on the back rod, then lock it in place.
Because the rod exits both ends, force is equal in both directions. It provides 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.