
The AirTAC SEJ Adjustable Cylinder SEJ125X75-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø125mm unit covers an effective stroke of 25–75mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X75-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so the output force is perfectly equal in both directions at 5734 N each way at 0.5 MPa. By turning the mechanical stop screw on the back rod, you can dial the retract end-position to cover an effective stroke range of 25 to 75 mm.
This extruded aluminum barrel design omits external tie rods entirely and includes field-adjustable air cushions at both ends to decelerate heavy loads near the stroke limits. The 32 mm diameter rod uses an M27x2 end thread, and because this SKU lacks the -S magnet option, it does not support CMSE or DMSE position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X75-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 75 mm |
| Adjustment window | 50 mm (25–75 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×75 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 25 to 75 mm retract stop on a stamping press to accommodate different material thicknesses, leveraging the 1169 kgf max force for rigid clamping.
Fine-tune the clamping reach on robotic weld cells to seat parts precisely, relying on the 40 mm cushion length to decelerate the massive moving loads before impact.
Confirm the 50 mm adjustment window covers your required end-position variance; this single unit handles a 25 to 75 mm effective stroke range. If you need less force, stepping down to the 100 mm bore yields 3681 N at 0.5 MPa, while stepping up is not available as 125 mm is the largest in the series. If your end position never changes, a fixed-stroke SED double-rod cylinder is sufficient and shorter overall. This plain SEJ does not hold position on air loss; the adjustable cushion and stop screw only set the mechanical end and decelerate near stroke end, so specify an external rod lock for fail-safe holding. When replacing an ISO 15552 cylinder, match the 125 mm bore, 75 mm nominal stroke, PT1/2 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke over a 50 mm window. You can set the effective stroke anywhere from 25 mm up to the full 75 mm, then lock the screw in place.
Because it is a double-rod cylinder, the force is identical in both directions. It generates 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.