verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X80-20

The AirTAC SEJ Adjustable Cylinder SEJ125X80-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø125mm unit covers an effective stroke of 60–80mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke80 mm
  • Adjust window20 mm
  • Effective stroke60–80 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$292.42 $299.92Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X80-20

The AirTAC SEJ125X80-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a mechanically adjustable retract stroke. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 5734 N each way at 0.5 MPa. The integrated stop screw on the back rod lets you dial the retract end over a 20 mm window, providing an effective stroke range of 60 to 80 mm.

This 125 mm bore pneumatic cylinder operates at 30-500 mm/s and uses adjustable air cushions at both ends to decelerate the payload near stroke end. It features a PT1/2 port, a Ø32 mm rod with an M27x2 thread, and an extruded aluminum barrel without external tie rods. This SKU has no magnet, so it will not work with CMSE or DMSE position sensors.

Airtac SEJ Adjustable Cylinder SEJ125X80-20 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X80-20
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke80 mm
Adjustment window20 mm (60–80 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X80-20

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×80Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X80-20 Is Used

precision_manufacturing

Press Tonnage Calibration

Dial in the exact 60-80 mm retraction stop on a heavy press to test tonnage calibration, utilizing the 5734 N both-way force to seat heavy materials precisely.

straighten

Heavy-Duty Straightener

Adjust the retract end to accommodate different material thicknesses in a metal straightener, using the equal push and pull force to prevent workpiece distortion.

view_module

Pallet Changeover

Fine-tune the end position during automated pallet size changeovers, ensuring the 8028 N at 0.7 MPa securely shifts heavy pallet bases without mechanical shims.

Is the Airtac SEJ Adjustable Cylinder SEJ125X80-20 the Right Cylinder?

Confirm the 20 mm adjustment window covers your required end-position variance. If you need less force, stepping down to the 100 mm bore yields 3681 N both ways at 0.5 MPa; if you need more, note that 125 mm is the largest standard SEJ size, delivering 8028 N at 0.7 MPa and a maximum of 1169 kgf at 1.0 MPa. If your end position never changes, a fixed-stroke SED cylinder is sufficient. For fail-safe load holding on air loss, use an external rod lock or BSED, as the stop screw and air cushion only set the mechanical end and decelerate, they do not lock the piston. When replacing an ISO 15552 cylinder, match the 125 mm bore, 80 mm nominal stroke, PT1/2 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X80-20 FAQ

The retract stroke has a 20 mm adjustment window via a stop screw on the back rod. You can dial the effective stroke from 60 mm up to the nominal 80 mm, allowing precise end-position tuning on the machine without changing hardware.

Because the rod exits both ends, force is equal in both directions. It generates 5734 N each way at 0.5 MPa, 8028 N each way at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X80-20

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X80-20 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.