
The AirTAC SEJ Adjustable Cylinder SEJ125X80-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø125mm unit covers an effective stroke of 40–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X80-40S is a double-acting, double-rod ISO 15552 profile cylinder with a mechanically adjustable retract stroke. A rod exits both ends, yielding identical annulus areas and an equal force of 5734 N each way at 0.5 MPa. The 40 mm adjustment window lets you dial the retract end from 40 to 80 mm, perfect for fine-tuning a precise end position directly on the machine.
This bore 125 unit features a PT1/2 port, a Ø32 mm rod with an M27x2 thread, and an integrated magnet for CMSE or DMSE sensors. Field-adjustable air cushions at both ends decelerate the heavy 1169 kgf maximum load near stroke end, while the back-rod stop screw locks the final mechanical position after commissioning.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X80-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 40 mm (40–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 40mm retract window to precisely set lower-die contact on heavy stamping presses, leveraging 5734N both-way force to maintain ram equilibrium.
Adjust the end position on the fly for thick steel plate bending machines, using the M27x2 rod and 8028N at 0.7MPa to push consistent flange angles.
Swap stop heights for different pallet sizes on packaging lines, fine-tuning the 40-80mm effective stroke to match each new part profile without swapping hardware.
Verify the 40 mm adjustment window covers your variable stop range, giving an effective 40 to 80 mm stroke. If you need less force, the next bore down is 100 mm providing 3681 N at 0.5 MPa; if you need more, step up to this 125 mm bore yielding 5734 N at 0.5 MPa. If your end position never changes, a fixed-stroke SED avoids the extra length. For fail-safe holding on air loss, use an external rod lock, as the cushion and stop screw do not lock the load.
When replacing an ISO 15552 cylinder, match the 125 mm bore, 80 mm nominal stroke, PT1/2 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2. The -S magnet supports CMSE reed and DMSE electronic sensors for position feedback.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
The 40mm stop-screw window on the back rod lets you mechanically dial the retract stroke, creating an effective stroke range of 40 to 80mm. You lock the stop screw after setting the exact end position.
Because the rod exits both ends, force is identical in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.