
The AirTAC SEJ Adjustable Cylinder SEJ125X80-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø125mm unit covers an effective stroke of 30–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X80-50 is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas and an equal force of 5734 N each way at 0.5 MPa. The retract stroke is mechanically adjustable via a back-rod stop screw over a 50 mm window, giving an effective stroke range of 30 to 80 mm.
This 125 mm bore extruded-aluminum cylinder runs at 30-500 mm/s with a PT1/2 port and M27x2 rod thread. It features field-adjustable air cushions at both ends for deceleration. Note this SKU lacks a magnet for position sensing.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X80-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 50 mm (30–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the retract end up to 50 mm to accommodate varying die heights during stamping press setup, using the 5734 N both-way force to shift heavy tooling.
Fine-tune the mechanical stop on a thick-plate bending machine over the 30-80 mm effective range, locking the back-rod screw precisely to the required bend angle.
Test and set exact end positions for different pallet sizes during commissioning, leveraging the equal push and pull forces to move loads without re-mounting hardware.
Verify the 50 mm adjustment window covers your range. If 5734 N at 0.5 MPa is excessive, step down to the 100 mm bore (3681 N both ways); if you need more push, there is no larger standard SEJ. If your end position never changes, a fixed-stroke SED is simpler. The air cushion decelerates near stroke end but does not hold position on air loss—use an external rod lock for fail-safe holding. For ISO 15552 replacement matching, confirm the 80 mm stroke, 50 mm window, PT port, and mounting.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
The retract end is mechanically adjustable via a stop screw over a 50 mm window, giving an effective stroke range of 30 to 80 mm. You lock the screw after setting the exact end position.
Because the rod exits both ends, force is equal in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.