
The AirTAC SEJ Adjustable Cylinder SEJ125X80-75 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø125mm unit covers an effective stroke of 5–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X80-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 75mm adjustable stroke window, yielding an effective stroke range of 5-80mm. A rod exits both ends, meaning the annulus area is identical in both directions. This provides an equal force of 5734 N each way at 0.5 MPa, ensuring perfectly balanced push and pull dynamics for heavy loads.
A mechanical stop screw on the back rod allows precise dialing of the retract end position during machine commissioning without swapping hardware. The extruded aluminum barrel omits external tie rods, and this specific SKU lacks a magnet, meaning it cannot host CMSE or DMSE position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X80-75 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 75 mm (5–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 5-80mm retract stop during stamping press changeovers to accommodate different die heights, utilizing the 5734 N both-way force.
Adjust the stroke end on the fly to meet varying pallet widths without changing hardware, leveraging the equal push/pull annulus area for smooth diversion.
Fine-tune the clamping position on the machine during commissioning, locking the back-rod stop screw precisely where the 8028 N at 0.7 MPa secures the part.
This 125mm bore cylinder generates 5734 N both ways at 0.5 MPa. If your application requires less force, stepping down to the 100mm bore yields 3681 N both ways. If you need more force, 125mm is the largest standard SEJ size, so exceeding 1169 kgf at 1.0 MPa requires a larger custom or twin setup. Choose this adjustable version if your end-position needs to vary within the 75mm window; otherwise, a fixed-stroke SED is sufficient.
Remember that the adjustable air cushion at both ends decelerates the load near stroke end but does not hold position on air loss; for fail-safe holding, use an external rod lock. Ensure your replacement matches the PT1/2 port, M27x2 rod thread, and the 30-500 mm/s speed range. For any stroke over 300mm, external guides are recommended to prevent side-load wear, though this 80mm unit handles standard loads well.
Quick checklist
The retract stroke can be dialed in over a 75mm window, giving an effective stroke range of 5-80mm. You set the mechanical end position using a stop screw on the back rod, then lock it in place.
Because the rod exits both ends, force is equal in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.