verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ32X160-75S

The AirTAC SEJ Adjustable Cylinder SEJ32X160-75S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø32mm unit covers an effective stroke of 85–160mm without changing cylinders. Force is equal in both directions.

  • BoreØ32 mm
  • Nominal stroke160 mm
  • Adjust window75 mm
  • Effective stroke85–160 mm
  • Port sizePT1/8
  • CushionAdjustable, 27 mm
$78.39 $85.89Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ32 stroke, mounting and version on one page All SEJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ32X160-75S

The AirTAC SEJ32X160-75S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 75 mm adjustable stroke window, allowing you to dial the retract end down for an effective stroke range of 85 to 160 mm. Because a rod exits both ends, the annular area is identical in both directions, yielding an equal drive force of 345 N each way at 0.5 MPa. The included -S magnet enables position detection with CMSE reed or DMSE electronic sensors.

A mechanical stop screw on the back rod sets the precise retract position, which you lock in place after fine-tuning the machine end-point. This extruded aluminum barrel design omits external tie rods and includes field-adjustable air cushions at both ends to decelerate the 12 mm rod near stroke extremes.

Airtac SEJ Adjustable Cylinder SEJ32X160-75S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ32X160-75S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ32 mm
Nominal stroke160 mm
Adjustment window75 mm (85–160 mm)
ConfigurationDouble rod, double acting
Port sizePT1/8
Rod threadM10×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø32mm)

PressureForce (both directions)
0.5 MPa346 N
0.7 MPa484 N
Max (@1.0 MPa)70 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ32X160-75S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
32Bore size in mm.
×160Nominal stroke length in mm.
-75Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ32X160-75S Is Used

tune

Pick-and-Place Calibration

Dial in the 75 mm retract window to perfect a 345 N pick-and-place end position during machine commissioning without machining new hard stops.

swap_horiz

Packaging Changeover

Adjust the effective stroke between 85 and 160 mm to accommodate different carton heights on a packaging line, using the equal both-way force for stable retraction.

science

Trial Positioning Jig

Use the back rod as an adjustable flag/cam to trigger a DMSE electronic sensor while testing multiple extend positions for a 70 kgf maximum press fit.

Is the Airtac SEJ Adjustable Cylinder SEJ32X160-75S the Right Cylinder?

Verify that the 75 mm adjustment window covers your required end-position variance. If 345 N at 0.5 MPa is excessive, stepping down is not possible within the 32 mm bore (it is the smallest size), so you must reduce your supply pressure. If you need more force, the next size up is the 40 mm bore, providing 528 N both ways at 0.5 MPa. If your process never requires stroke modification, a fixed-stroke SED cylinder provides a shorter overall length. Note that this plain SEJ cylinder does not hold position on air loss; the adjustable cushion and stop screw only set the mechanical end and decelerate near stroke end, so specify a BSED or external rod lock for fail-safe holding. As an ISO 15552 cylinder, it dimensionally matches standard 32 mm bore, 160 mm stroke hardware with a PT1/8 port.

AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (75mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 75mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ32X160-75S FAQ

A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 75 mm. The effective stroke range is 85 to 160 mm. You set the exact end position on the machine and lock the screw in place.

Because the double-rod design creates equal annular areas, the force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ32X160-75S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ32X160-75S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.