
The AirTAC SEJ Adjustable Cylinder SEJ32X265-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø32mm unit covers an effective stroke of 235–265mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X265-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm adjustable retract stroke, yielding an effective travel range of 235 to 265 mm. A rod exits both ends, ensuring the annulus area remains identical in both directions. This provides an equal force of 345 N each way at 0.5 MPa, preventing speed asymmetry during cycling.
You dial in the exact end-position by turning the back-rod stop screw, then lock it in place—ideal for fine-tuning a machine stop during commissioning. This extruded aluminum profile cylinder includes a magnet for CMSE reed and DMSE electronic sensors. It provides field-adjustable air cushions at both ends to decelerate the load near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X265-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 265 mm |
| Adjustment window | 30 mm (235–265 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×265 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 235-265 mm retract position precisely during machine commissioning to hit a target pick location, utilizing the equal 345 N both-way force for consistent lifting.
Adjust the mechanical stop over the 30 mm window to accommodate different incoming part heights on a conveyor without swapping out the entire cylinder assembly.
Use the back-rod stop screw to test exact clamping positions during prototype runs, locking the cylinder at the perfect effective stroke before finalizing the machine layout.
Confirm this 30 mm adjustment window safely covers your required end-position variance. If your application requires less force, stepping down is not possible as 32 mm is the smallest bore. If you need more force, the next bore up is 40 mm, providing 528 N both ways at 0.5 MPa. If your stroke length never changes, a fixed-stroke SED cylinder provides the same double-rod stability without the adjustment hardware. For replacing an ISO 15552 cylinder, match the 32 mm bore, 265 mm stroke, PT1/8 port, and your required mounting accessory (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Since the stroke is 265 mm, external guides are recommended to prevent rod side-load and extend seal life. Note: this cylinder does not hold position on air loss; use an external rod lock for fail-safe holding.
Quick checklist
The 30 mm adjustment window allows you to dial the retract stroke from 235 mm up to the nominal 265 mm. You set the exact end-position via the back-rod stop screw and lock it in place.
Because the rod exits both ends, force is equal in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.