verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ32X500-50S

The AirTAC SEJ Adjustable Cylinder SEJ32X500-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø32mm unit covers an effective stroke of 450–500mm without changing cylinders. Force is equal in both directions.

  • BoreØ32 mm
  • Nominal stroke500 mm
  • Adjust window50 mm
  • Effective stroke450–500 mm
  • Port sizePT1/8
  • CushionAdjustable, 27 mm
$114.42 $121.92Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ32 stroke, mounting and version on one page All SEJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ32X500-50S

The AirTAC SEJ32X500-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50mm adjustable stroke window, allowing the retract end to be dialed in for an effective stroke range of 450-500mm. A rod exits both ends, ensuring the annulus area remains identical and delivering equal force and speed in both directions—about 345 N each way at 0.5 MPa. The extruded aluminum barrel contains no external tie rods, maintaining strict ISO 15552 dimensional interchangeability.

This specific configuration includes a magnet for position sensing, supporting CMSE reed and DMSE electronic sensors. The rear rod incorporates a mechanical stop screw to set the precise end position, which must be locked after commissioning. Field-adjustable air cushions at both ends provide kinetic deceleration near stroke end, though this mechanism is not a fail-safe lock and will not hold a load on air loss.

Airtac SEJ Adjustable Cylinder SEJ32X500-50S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ32X500-50S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ32 mm
Nominal stroke500 mm
Adjustment window50 mm (450–500 mm)
ConfigurationDouble rod, double acting
Port sizePT1/8
Rod threadM10×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø32mm)

PressureForce (both directions)
0.5 MPa346 N
0.7 MPa484 N
Max (@1.0 MPa)70 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ32X500-50S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
32Bore size in mm.
×500Nominal stroke length in mm.
-50Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ32X500-50S Is Used

precision_manufacturing

Pick-and-Place Height Tuning

Dial in the 450-500mm retract position during commissioning to match varying part heights on a packaging line, utilizing the equal 345 N both-way force for consistent placement.

tune

Press Stroke Calibration

Adjust the mechanical stop screw on a light-assembly press to hit exact engagement depths, locking the 12mm rear rod after finding the perfect mechanical end point.

swap_horiz

Changeover Positioning

Rapidly reconfigure the effective stroke window when switching a conveyor sorting station between product families, relying on the CMSE magnet sensor for confirmation.

Is the Airtac SEJ Adjustable Cylinder SEJ32X500-50S the Right Cylinder?

Confirm the 50mm adjustment window covers your required end-position variance for this 500mm nominal stroke unit. If your application demands higher force, stepping up to the 40mm bore yields 528 N both ways at 0.5 MPa; conversely, 32mm is the smallest standard ISO 15552 option. If you do not require variable positioning, a fixed-stroke SED provides equivalent double-rod action without the adjustment hardware. For replacing an ISO 15552 cylinder, match the 32mm bore, 500mm stroke, PT1/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). At 500mm stroke, the 12mm rod is highly susceptible to side loading; external guide rails should support the load to prevent binding.

AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (50mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 50mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ32X500-50S FAQ

A stop screw on the back rod mechanically shortens the retract stroke over a 50mm window, giving an effective stroke range of 450-500mm. You dial in the exact end position on the machine and lock it, meaning one cylinder covers a stroke range without changing hardware.

Because it is a double-rod cylinder, the force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ32X500-50S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ32X500-50S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.