
The AirTAC SEJ Adjustable Cylinder SEJ32X550-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø32mm unit covers an effective stroke of 450–550mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X550-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm adjustable stroke window. A rod exits both ends, yielding equal force in both directions at 345 N each way at 0.5 MPa. You can dial the retract end from 450mm to 550mm, letting one unit cover a precise range without changing hardware.
A stop screw on the back rod mechanically sets the end position, which you lock after commissioning. The extruded aluminum barrel has no external tie rods, and the included -S magnet supports CMSE reed and DMSE electronic sensors. Field-adjustable air cushions at both ends decelerate the load near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X550-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 550 mm |
| Adjustment window | 100 mm (450–550 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×550 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Fine-tune the retract end during CNC fixture commissioning. The 100mm window lets you dial the 345N clamping stroke from 450 to 550mm to match varying part heights perfectly.
Adjust the mechanical stop on conveyor sorting gates without swapping cylinders. The back-rod stop screw handles changeover to different carton lengths within the 450-550mm range.
Test end positions in packaging prototypes.
Verify the 100mm adjustment window covers your required end-position range. If you need less force, the adjacent bore down is unavailable in the SEJ series, so 32mm is the minimum. If you need more thrust, stepping up to bore 40mm provides 528 N both ways at 0.5 MPa. If your end position never changes, a fixed-stroke SED cylinder is enough. This plain SEJ does not hold position on air loss; the cushion and stop screw only set the mechanical end and decelerate the load, so use an external rod lock for fail-safe holding.
At 550mm stroke, the extended rod is highly susceptible to side loads. You must use external guides to prevent binding and premature seal wear. For an ISO 15552 replacement, match the 32mm bore, 550mm stroke, 100mm window, PT1/8 port, and your specific mounting choice from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder
Quick checklist
The 100mm adjustment window lets you mechanically dial the retract end position anywhere from 450mm to 550mm. You set the stop screw on the back rod to the exact position needed and lock it in place.
Because the rod exits both ends, force is equal in both directions. It generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.