
The AirTAC SEJ Adjustable Cylinder SEJ32X70-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø32mm unit covers an effective stroke of 20–70mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X70-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A rod exits both ends, yielding an equal effective area and identical force in both directions—delivering 345 N at 0.5 MPa and 483 N at 0.7 MPa. You can dial the retract stroke from 20 mm up to 70 mm using the back-rod stop screw, allowing precise on-machine end-position tuning without swapping hardware.
This extruded aluminum profile cylinder omits external tie rods and includes field-adjustable air cushions at both ends to manage deceleration. It uses a PT1/8 port, a Ø12 mm rod with an M10x1.25 thread, and operates at speeds from 30 to 800 mm/s. Note that this specific SKU lacks a magnet, so CMSE or DMSE position sensors cannot be mounted without a different configuration.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X70-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 70 mm |
| Adjustment window | 50 mm (20–70 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×70 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 20-70 mm retract stroke to precisely match packaging carton stop positions. The equal 345 N both-way force securely shifts lighter product guides without asymmetric drift.
Adapt pick-and-place end positions on the fly for different part heights. The back-rod stop screw lets you fine-tune the 50 mm window during line changeovers without machining new stops.
Set exact mechanical end limits during machine commissioning. Lock the stop screw after finding the perfect contact point, relying on the 483 N at 0.7 MPa to consistently actuate test fixtures.
Verify that the 50 mm adjustment window covers your required 20-70 mm effective stroke range for precise changeover or end-stop matching. If you need less force, the adjacent 32 mm bore is the smallest available SEJ size, so stepping down is not an option here. If your application requires more thrust, stepping up to the 40 mm bore provides 528 N at 0.5 MPa both ways. If your stroke never varies, a fixed-stroke SED cylinder offers a simpler setup. For holding position on air loss, note that this cylinder does not function as a fail-safe lock; you must pair it with an external rod lock or a BSED series cylinder. Ensure your ISO 15552 replacement matches the 32 mm bore, 70 mm nominal stroke, PT1/8 port, and chosen mounting from the Basic, FA, LB, TC, FTC, TCM1, or TCM2 subset.
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke over a 50 mm window. You can adjust the effective stroke anywhere from 20 mm up to the nominal 70 mm, then lock the screw in place for precise on-machine positioning.
Because it is a double-rod cylinder, the force is identical in both directions. It generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.