
The AirTAC SEJ Adjustable Cylinder SEJ40X550-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø40mm unit covers an effective stroke of 450–550mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X550-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100 mm adjustable stroke window. You can dial the retract end from 450 mm up to 550 mm, letting one unit cover a range of end positions without swapping hardware.
This 40 mm bore unit uses a PT1/4 port and a Ø16 mm rod with an M12x1.25 thread. The included magnet (-S) supports CMSE reed and DMSE electronic sensors for position feedback. Adjustable air cushions at both ends absorb kinetic energy near stroke end, while the back-rod stop screw locks down your exact setting after commissioning.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X550-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 550 mm |
| Adjustment window | 100 mm (450–550 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×550 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 100 mm window to adapt flap-folding arms for varying carton depths. The equal 528 N both-way force ensures crisp fold control across the 450-550 mm range.
Set precise electrode contact positions on a spot welder. The back-rod stop screw locks the exact 450-550 mm end point, while adjustable cushions protect the 40 mm bore at speed.
Act as an adjustable physical stop for PCB routing conveyors. Operators quickly tune the retract stroke for different board lengths without changing out cylinder hardware.
Confirm this 100 mm adjustment window covers your required end-position variance. If you need less fine-tune range, a fixed-stroke SED saves cost, but this SEJ excels at machine changeovers. For sizing both ways: stepping down to a 32 mm bore yields 345 N at 0.5 MPa, while stepping up to a 50 mm bore provides 825 N both ways. This 40 mm bore generates 739 N at 0.7 MPa and a maximum of 108 kgf at 1.0 MPa.
At 550 mm, the stroke is long enough that external guides are recommended to prevent rod side-loading. The air cushion and stop screw decelerate the load and set the mechanical end, but a plain SEJ will not hold position on air loss; for fail-safe holding, specify a BSED or an external rod lock. Ensure your ISO 15552 replacement matches the PT port, mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), and magnet option.
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke. For this model, you can adjust the effective stroke anywhere from 450 mm up to the nominal 550 mm. You lock the screw after finding the exact end position required for your machine.
Because it is a double-rod cylinder, force is identical in both directions. It provides 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.