
The AirTAC SEJ Adjustable Cylinder SEJ40X80-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø40mm unit covers an effective stroke of 60–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X80-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. A rod exits both ends, meaning the effective retract stroke can be dialed in from 60mm up to 80mm.
This unit includes a magnet for CMSE reed or DMSE electronic sensors. The retract position is set via a stop screw on the back rod, which you lock after finding the exact end position. It features field-adjustable air cushions at both ends to decelerate the load near the stroke extremes.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X80-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 20 mm (60–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 60-80mm end stop during setup to perfectly align a 528 N clamping motion without machining new spacers.
Quickly adjust the retract stroke to accommodate varying part heights on a conveyor line, relying on the equal both-way force.
The 20mm adjustment window lets you fine-tune the end position during commissioning without swapping hardware. If 528 N at 0.5 MPa is too much force, step down to the 32mm bore (345 N). If you need more push, the 50mm bore provides 825 N. If your stroke never changes after setup, a fixed-stroke SED saves cost. For holding position on air loss, use a BSED or external rod lock. This cylinder is dimensionally interchangeable per ISO 15552—match the 40mm bore, 80mm stroke, PT1/4 port, and mounting.
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke. For this model, you can adjust the stroke from 60mm to 80mm. You set the position on the machine and lock the screw in place.
Because it is a double-rod cylinder, force is equal in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.