
The AirTAC SEJ Adjustable Cylinder SEJ40X80-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø40mm unit covers an effective stroke of 40–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X80-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40 mm adjustable stroke window. By turning the stop screw on the back rod, you can mechanically shorten the retract stroke, giving an effective range of 40 to 80 mm without changing hardware.
This extruded-aluminum profile cylinder includes field-adjustable air cushions at both ends to decelerate the load near the stroke limits. The -S magnet option enables position sensing with CMSE reed or DMSE electronic sensors. Mounting options span Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR configurations.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X80-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 40 mm (40–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 40-80 mm press stroke during machine commissioning, using the 739 N retract force at 0.7 MPa to seat bearings without over-traveling.
Set precise trial positions for machining jigs by shortening the stroke up to 40 mm, locking the back-rod stop screw once the exact 40-80 mm end point is found.
This 40 mm bore is ideal when you need to commission a machine and fine-tune an end position within a 40 to 80 mm window. If your application requires less force, stepping down to the 32 mm bore provides 345 N at 0.5 MPa. If you need more clamping power, stepping up to the 50 mm bore yields 825 N at 0.5 MPa. If your stroke requirement is fixed and never changes, a standard SED double-rod cylinder is sufficient.
Remember that the adjustable stop screw and air cushions only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, you need an external rod lock like the BSED. When replacing an ISO 15552 cylinder, match the 80 mm stroke, 40 mm bore, PT1/4 port, and desired mounting hardware.
Quick checklist
A stop screw on the rear rod mechanically limits the retract stroke. You can dial the retract end-position within a 40 mm window, giving an effective stroke range of 40 to 80 mm. You lock the screw after finding the exact position.
Because the double-rod design creates equal annular areas, force is identical in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.