
The AirTAC SEJ Adjustable Cylinder SEJ40X80-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø40mm unit covers an effective stroke of 30–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X80-50 is a double-acting, double-rod ISO 15552 profile cylinder with a 50 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas and an equal force of 528 N each way at 0.5 MPa. You can dial the retract end from 30 mm up to the nominal 80 mm stroke, providing a 50 mm mechanical fine-tuning range via a back-rod stop screw.
This 40 mm bore pneumatic cylinder features a PT1/4 port, a Ø16 mm rod with an M12x1.25 thread, and field-adjustable air cushions at both ends to manage deceleration. The extruded aluminum barrel omits external tie rods for a clean ISO 15552 dimensionally interchangeable envelope. This specific SKU lacks a magnet, meaning it will not support CMSE or DMSE position sensors without modification.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X80-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 50 mm (30–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 30 to 80 mm clamping depth on a fitting press using the 528 N both-way force, locking the back-rod stop screw once the perfect mechanical end position is found.
Quickly reconfigure a conveyor diverter arm for different package heights without swapping hardware, adjusting the retract stroke within the 50 mm window to match each part profile.
Use the equal push and pull thrust during machine commissioning to test part ejection cycles, fine-tuning the end stop in millimeters before finalizing the mechanical layout.
Confirm the 50 mm adjustment window suits your positioning needs, as the effective retract stroke spans 30 to 80 mm. If you need less force, the adjacent 32 mm bore provides 345 N both ways at 0.5 MPa; if you require more thrust, step up to the 50 mm bore, which delivers 825 N each way at 0.5 MPa. If your end position is permanently fixed and never requires machine commissioning tweaks, a standard SED double-rod cylinder is sufficient.
For an exact ISO 15552 replacement, match the 40 mm bore, 80 mm nominal stroke, 50 mm adjust window, PT1/4 port, and your required mounting bracket from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the adjustable air cushion and mechanical stop screw decelerate the load near stroke end but do not hold position on air loss; for fail-safe holding, use an external rod lock or a BSED series cylinder.
Quick checklist
A stop screw on the rear exiting rod mechanically shortens the retract stroke. You can dial the adjustment window up to 50 mm, giving an effective stroke range of 30 mm to the nominal 80 mm. You lock the screw after setting the exact end position.
Because it is a double-rod cylinder, the force is equal in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa. The standard operating speed range is 30-800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.