
The AirTAC SEJ Adjustable Cylinder SEJ63X150-100 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø63mm unit covers an effective stroke of 50–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X150-100 is a double-acting, double-rod ISO 15552 profile cylinder with a 100 mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This yields an equal output force of 1402 N each way at 0.5 MPa, preventing speed discrepancies between extend and retract.
You dial the retract end from 50 to 150 mm using a stop screw on the back rod. Once the mechanical end position is set, you lock it in place. This cylinder lacks a magnet, so it will not directly host CMSE or DMSE position sensors without modification.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X150-100 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 100 mm (50–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 50-150 mm stop position for varying metal sheet widths, applying 1402 N of equal thrust both ways to halt the feed reliably.
Quickly adjust the retract distance to match different pallet thicknesses on a packaging line without changing the cylinder hardware.
Fine-tune the end-of-stroke position during machine commissioning to perfectly align a gripper, locking the back-rod screw once the trial position is set.
This 100 mm window lets you fine-tune a wide 50-150 mm range on the machine, perfect for prototyping or accommodating multiple part heights without swapping hardware. If you need less force, the 50 mm bore provides 825 N at 0.5 MPa; if you need more, step up to the 80 mm bore for 2268 N at 0.5 MPa. A fixed-stroke SED is simpler if your end position never changes. The adjustable air cushion decelerates the load near stroke end but is not a lock; a plain SEJ will not hold position on air loss, so use a BSED or external rod lock for fail-safe holding. As an ISO 15552 cylinder, it matches standard bore, stroke, and PT3/8 port dimensions. Because the stroke is under 300 mm, side-load stress is minimal, but external guides are still recommended for heavy radial loads.
Quick checklist
The SEJ63X150-100 has a 100 mm adjustment window. You mechanically dial the retract end position using a stop screw on the back rod, giving an effective stroke range of 50 to 150 mm. You lock the screw after setting the exact end position.
Because it is a double-rod cylinder, the force is identical in both directions. It delivers 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.