
The AirTAC SEJ Adjustable Cylinder SEJ63X150-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø63mm unit covers an effective stroke of 130–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X150-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20 mm mechanical stroke adjuster on the back rod. You can dial the retract end position down to 130 mm, giving an effective stroke range of 130-150 mm for precise machine commissioning.
This extruded aluminum profile cylinder omits external tie rods and includes adjustable air cushions at both ends to decelerate the load near stroke end. Equipped with a standard magnet (-S), it supports CMSE reed and DMSE electronic sensors for position feedback. The back-rod stop screw mechanism lets you fine-tune the end position directly on the machine, then lock it in place.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X150-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 20 mm (130–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 130-150 mm clamping depth on an assembly press.
Quickly reconfigure the end stop for varying product heights on a packaging line. The 20 mm back-rod adjustment window allows fast mechanical changes without swapping cylinders.
Fine-tune the positioning datum on a multi-stage machining fixture. The double-rod design resists rod side-loading while maintaining symmetrical force throughout the 150 mm travel.
Confirm this 20 mm adjustment window covers your required end-position range. If you need less force, the adjacent 50 mm bore provides 825 N both ways at 0.5 MPa; if you need more, step up to the 80 mm bore which yields 2268 N at 0.5 MPa. If your application requires a fixed end position and no future adjustment, a standard SED double-rod cylinder is sufficient. For a direct ISO 15552 replacement, match the 63 mm bore, 150 mm stroke, PT3/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the air cushion and mechanical stop screw only decelerate the load and set the end position; they do not hold position on air loss. For fail-safe holding, use an external rod lock or a BSED series cylinder.
AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 20 mm window. You can dial the effective stroke from 130 mm up to the nominal 150 mm, then lock the screw in place for precise end-position tuning on the machine.
Because it is a double-rod cylinder, force is equal in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.