
The AirTAC SEJ Adjustable Cylinder SEJ63X150-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø63mm unit covers an effective stroke of 120–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X150-30S is a double-acting, double-rod ISO 15552 profile cylinder with a 30 mm adjustable stroke window. A rod exits both ends, meaning the annular area is identical in both directions for an equal force of 1402 N each way at 0.5 MPa. You can dial the retract end from 120 to 150 mm to perfectly dial in a mechanical stop.
Because it carries the -S magnet option, the cylinder integrates seamlessly with CMSE reed and DMSE electronic sensors for position feedback. The extruded aluminum barrel contains no external tie rods, and the field-adjustable air cushions at both ends provide smooth deceleration over the 36 mm cushion length without acting as a hard lock.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X150-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 30 mm (120–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 120-150 mm retract stop during commissioning to set a precise pressing force up to 1962 N at 0.7 MPa without swapping hardware.
Use the 30 mm adjustment window to trial different end positions on a new fixture, locking the stop screw once the optimal stroke is found.
This 63 mm bore delivers 1402 N at 0.5 MPa and 1962 N at 0.7 MPa both directions. If you need less force, step down to the 50 mm bore (825 N at 0.5 MPa); for heavier loads, step up to the 80 mm bore (2268 N at 0.5 MPa). The 30 mm adjustment window is ideal for commissioning a machine when you need to fine-tune an end position without machining new hardware. If your stroke never varies, a fixed-stroke SED is sufficient. Remember, a plain SEJ does not hold position on air loss; for fail-safe holding, use a BSED or an external rod lock. When replacing an ISO 15552 cylinder, verify the 150 mm stroke, 30 mm window, PT3/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke over a 30 mm window, giving an effective stroke range of 120 to 150 mm. You dial it in during commissioning and lock it after setting your precise end position.
Because the rod exits both ends, force is equal in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.