verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ63X25-10

The AirTAC SEJ Adjustable Cylinder SEJ63X25-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø63mm unit covers an effective stroke of 15–25mm without changing cylinders. Force is equal in both directions.

  • BoreØ63 mm
  • Nominal stroke25 mm
  • Adjust window10 mm
  • Effective stroke15–25 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$100.26 $107.76Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ63 stroke, mounting and version on one page All SEJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ63X25-10

The AirTAC SEJ63X25-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so thrust is equal in both directions at 1402 N each way at 0.5 MPa. You can dial the retract stop down to achieve an effective stroke range of 15 to 25 mm.

Because the back-rod stop screw sets the mechanical end, you can fine-tune the exact position during machine commissioning without swapping hardware. The extruded aluminum barrel omits external tie rods, and the field-adjustable air cushion at both ends decelerates the load near stroke end. This SKU has no magnet, so it will not support CMSE or DMSE sensors.

Airtac SEJ Adjustable Cylinder SEJ63X25-10 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ63X25-10
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ63 mm
Nominal stroke25 mm
Adjustment window10 mm (15–25 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressureForce (both directions)
0.5 MPa1402 N
0.7 MPa1962 N
Max (@1.0 MPa)286 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ63X25-10

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
63Bore size in mm.
×25Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ63X25-10 Is Used

tune

Press Stroke Calibration

Dial in the exact 15 to 25mm clamping reach on a small pneumatic press, matching part height variations precisely without machining spacers.

swap_horiz

Conveyor Changeover

Tune the retract stroke during product changeover to position a 1402N transfer pusher perfectly for different package sizes.

precision_manufacturing

End-Stop Truing

Fine-tune the mechanical end position on an indexing fixture, locking the back-rod stop screw once the exact location is set.

Is the Airtac SEJ Adjustable Cylinder SEJ63X25-10 the Right Cylinder?

Verify the 10mm adjustment window covers your required end-position tuning. If you need less thrust, the 50mm bore delivers 825 N both ways at 0.5 MPa; if you need more, step up to the 80mm bore for 2268 N both ways. If you do not need variable positioning, a fixed-stroke SED cylinder is sufficient. Remember that a plain SEJ does not hold position on air loss, and the cushion is not a brake. For a direct ISO 15552 replacement, match the 63mm bore, 25mm nominal stroke, PT3/8 port, and your required mounting from the Basic, FA, LB, TC, FTC, TCM1, or TCM2 subset.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ63X25-10 FAQ

The retract end is mechanically adjustable over a 10mm window, allowing the effective stroke to be dialed from 15mm up to the 25mm nominal length.

Because the rod exits both ends, force is equal in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ63X25-10

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ63X25-10 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.