
The AirTAC SEJ Adjustable Cylinder SEJ63X25-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø63mm unit covers an effective stroke of 5–25mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X25-20 is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable retract stroke. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions. You get 1402 N each way at 0.5 MPa, and 1962 N at 0.7 MPa.
The back-rod stop screw dials the retract end over a 20 mm window, setting an effective stroke range of 5 to 25 mm. This lets you fine-tune the exact end position on the machine without swapping hardware. It features a PT3/8 port, a Ø20 mm rod with an M16x1.5 thread, and field-adjustable air cushions at both ends. This SKU lacks a magnet, so it does not support CMSE or DMSE position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X25-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 25 mm |
| Adjustment window | 20 mm (5–25 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 5 to 25 mm stroke to precisely strip stamped parts without overtravel. The 1402 N both-way force ensures positive ejection and retraction.
Set exact retract stops for different material thicknesses on a conveyor. The 20 mm window lets operators fine-tune positions rapidly during product changeover.
During machine commissioning, use the stop screw to find the perfect gripping distance.
Verify the 20 mm adjustment window covers your positioning range. If you need less force, the 50 mm bore provides 825 N at 0.5 MPa; if you need more, the 80 mm bore yields 2268 N at 0.5 MPa. If your stroke is fixed, a standard SED double-rod cylinder is simpler. For replacing an ISO 15552 unit, match the 25 mm stroke, 20 mm window, PT3/8 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
The adjustable air cushion decelerates the load near stroke end but is not a lock. A plain SEJ will not hold position on air loss. For fail-safe holding, use an external rod lock or a BSED series cylinder.
Quick checklist
The retract stroke can be dialed up to 20 mm via a stop screw on the back rod. This gives an effective stroke range of 5 to 25 mm, allowing precise end-position tuning on the machine.
Because the rod exits both ends, force is equal in both directions. It delivers 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.