
The AirTAC SEJ Adjustable Cylinder SEJ63X25-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø63mm unit covers an effective stroke of 5–25mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X25-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. You can dial the retract end from 5mm up to 25mm, letting you fine-tune the exact end position during machine commissioning without swapping hardware. A rod exits both ends, yielding identical annulus areas for equal force and speed in both directions.
Operating at 0.15-1.0 MPa, it delivers 1402 N each way at 0.5 MPa and 1962 N at 0.7 MPa. The rear rod mechanically guides against rotation and can carry a cam or flag. The -S magnet supports CMSE reed and DMSE electronic sensors, while field-adjustable air cushions at both ends decelerate the load near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X25-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 25 mm |
| Adjustment window | 20 mm (5–25 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 5 to 25mm stroke to set precise lower-die contact on a 63mm press, leveraging the 1962 N both-way force for consistent clamping.
Fine-tune the retract end stop during line commissioning to match a sensor cam perfectly, using the equal-both-way speed for stable motion.
Quickly adjust the stroke window when switching product heights on a packaging line, avoiding hardware swaps while maintaining 1402 N at 0.5 MPa.
Verify the 20mm adjustment window covers your positioning needs, allowing a 5 to 25mm effective stroke. If your process requires less force, the adjacent 50mm bore provides 825 N at 0.5 MPa. For higher thrust, the 80mm bore offers 2268 N at 0.5 MPa. If your end position is fixed and never changes, a standard SED double-rod cylinder is sufficient.
This plain cylinder does not hold position on air loss; the adjustable cushion and stop screw only set the mechanical end and decelerate the load, so use an external rod lock for fail-safe holding. As a dimensionally interchangeable ISO 15552 cylinder, match the 63mm bore, 25mm stroke, PT3/8 port, and mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2) for direct replacement.
AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder
Quick checklist
The 20mm adjustment window lets you dial the retract stroke from a minimum of 5mm up to the nominal 25mm. You set the mechanical end via a stop screw on the back rod and lock it in place.
Because the rod exits both ends, force is identical in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.