
The AirTAC SEJ Adjustable Cylinder SEJ63X25-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø63mm unit covers an effective stroke of -5–25mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X25-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so thrust and pull forces match exactly at 1402 N each way at 0.5 MPa. By turning the back-rod stop screw, you can dial the retract end down from 25mm to zero, hitting an exact end position without machining custom spacers.
This 63mm bore unit integrates a magnet for position sensing with CMSE reed or DMSE electronic switches. It uses adjustable air cushions at both ends to decelerate the load near the stroke extremes. Note the cushion only softens impact; it will not hold a load steady on air loss, so deploy an external rod lock for fail-safe positioning.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X25-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 25 mm |
| Adjustment window | 30 mm (-5–25 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 0-25mm clamping depth on a small pneumatic press, utilizing the 1962 N both-way force at 0.7 MPa to seat bearings without over-traveling.
Adjust the retract stop on the fly when a packaging line switches carton formats, using the 30mm window to set new flap-folding positions rapidly.
Micro-adjust the stroke during machine commissioning to find the perfect sensor trigger point, locking the back-rod screw once the optimal 25mm travel is set.
Verify the 30mm adjustment window covers your target range, letting you fine-tune the retract stroke from 0 to 25mm directly on the machine. If your process needs less force, the adjacent 50mm bore delivers 825 N at 0.5 MPa, while stepping up to the 80mm bore provides 2268 N. A fixed-stroke SED cylinder is sufficient if you never need to alter the end position after commissioning. For ISO 15552 dimensional replacements, match the 25mm stroke, 30mm window, PT3/8 port, and your required mounting bracket from the Basic, FA, LB, TC, FTC, TCM1, or TCM2 set.
Quick checklist
The 30mm adjustment window allows you to mechanically dial the retract stroke from 0mm up to the nominal 25mm. You set the exact end position by turning the stop screw on the back rod and locking it in place.
Because the rod exits both ends, the annulus area is identical in both directions. It delivers 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa for both extend and retract.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.