
The AirTAC SEJ Adjustable Cylinder SEJ80X125-100 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø80mm unit covers an effective stroke of 25–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X125-100 is a double-acting, double-rod ISO 15552 profile cylinder with a 100 mm mechanical stroke-adjustment window. A rod exits both ends, yielding identical annulus areas and an equal drive force of 2268 N each way at 0.5 MPa. You can dial the retract stroke from 25 mm up to 125 mm without swapping hardware.
A stop screw on the back rod lets you set the exact end position on the machine, then lock it. The extruded aluminum barrel carries no external tie rods, and adjustable air cushions at both ends decelerate the load near stroke end. This SKU has no magnet, so it does not support position sensing.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X125-100 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 100 mm (25–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 100 mm window to fine-tune the exact forming position on a hydraulic press, using the 3175 N both-way force to move the die plate.
Adjust the retract stop on the fly to catch different pallet thicknesses on a conveyor line, locking the back-rod screw at the required 25-125 mm height.
Set the exact compression distance for sealing electronics housings, leveraging the equal both-way force to ensure consistent pressure during extension and retraction.
The 100 mm window on this 80 mm bore cylinder covers a broad effective range of 25-125 mm, ideal for prototyping or dialing in a precise machine stop. If your process stabilizes on a fixed stroke, a standard SED double-rod cylinder offers a simpler setup. If you need to size around this 3175 N (at 0.7 MPa) output, the next bore down (63 mm) yields 1402 N, while the next bore up (100 mm) yields 3681 N both ways at 0.5 MPa.
For a direct ISO 15552 replacement, match the 125 mm nominal stroke, the 100 mm adjustment window, PT3/8 port, and your required mounting from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). The adjustable cushion is not a brake; this cylinder will not hold position on air loss, so use an external rod lock for fail-safe holding.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
The 100 mm adjustment window lets you mechanically dial the retract stroke down from the 125 mm nominal maximum to a 25 mm minimum effective stroke. You set the position via a stop screw on the back rod and lock it in place.
Because the double-rod design yields equal annulus area both ways, the force is identical in extension and retraction: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.