
The AirTAC SEJ Adjustable Cylinder SEJ80X125-75 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø80mm unit covers an effective stroke of 50–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X125-75 is a double-acting, double-rod ISO 15552 profile cylinder with a 75mm adjustable stroke window. You can dial the retract end from 50mm up to 125mm.
A stop screw on the back rod sets the mechanical end position for exact machine commissioning. The extruded aluminum barrel has no external tie rods, and adjustable air cushions at both ends decelerate the 25mm rod over 36mm. This SKU lacks a magnet, so it cannot host CMSE or DMSE sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X125-75 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 75 mm (50–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in 50 to 125mm clamping positions for varying aluminum casting heights, using the 2268N both-way force to secure parts without retooling.
Adjust the retract stop during press commissioning to strike a connector precisely, leveraging the equal push and pull forces to prevent binding.
Set the exact 50-125mm gate extension length on a packaging sorter to handle different carton widths on the fly.
This 80mm bore yields 2268N both ways at 0.5MPa. If you need less force, the 63mm bore provides 1402N; if your changeover requires more push, step up to the 100mm bore for 3681N. If your end position never varies, a fixed-stroke SED does the job without the adjustment hardware.
The 75mm window lets you match varying part heights on the fly. Remember, the stop screw and air cushions only set the end and decelerate; they do not hold position on air loss. For fail-safe holding, use an external rod lock. This cylinder is dimensionally interchangeable per ISO 15552, with a PT3/8 port and M20x1.5 rod thread.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
The retract stroke adjusts over a 75mm window. The effective stroke range is 50mm to 125mm, set via a stop screw on the back rod. You lock the screw after finding the exact end position.
Because the rod exits both ends, force is equal in both directions. It generates 2268N at 0.5MPa, 3175N at 0.7MPa, and a maximum of 463kgf at 1.0MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.