
The AirTAC SEJ Adjustable Cylinder SEJ80X25-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø80mm unit covers an effective stroke of 15–25mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X25-10S is a double-acting, double-rod ISO 15552 profile cylinder with a 10mm adjustable stroke window. You can dial the retract end from 15mm up to the nominal 25mm, letting you fine-tune the exact end position on the machine without swapping hardware.
This 80mm bore pneumatic cylinder features a Ø25mm rod, an M20x1.5 rod-end thread, and a PT3/8 port. The extruded aluminum barrel omits external tie rods for a clean ISO 15552 profile. It includes field-adjustable air cushions at both ends to decelerate near stroke end, and the built-in magnet supports CMSE reed and DMSE electronic sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X25-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 25 mm |
| Adjustment window | 10 mm (15–25 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×25 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dialing the retract stroke from 25mm down to 15mm lets operators precisely set insertion depth for bearing presses without machining new stops, using the equal 3175 N both-way force at 0.7 MPa.
Adjusting the back-rod stop screw on the fly accommodates different part heights on a conveyor line, using the 10mm window to match each product perfectly.
Perfect for prototyping jigs where the exact clamping distance is unknown; set the 80mm bore cylinder to the exact required position and lock the stop screw in place.
The 10mm adjustment window is ideal for commissioning a short-stroke press or dialing in a precise stop. If you need less force, stepping down to the 63mm bore yields 1402 N at 0.5 MPa both ways. If you need more power, the 100mm bore provides 3681 N at 0.5 MPa both ways. For a fixed-position setup that never requires end-tuning, a standard SED double-rod cylinder is sufficient.
Remember that the adjustable air cushion and mechanical stop screw only set the end position and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock. When replacing an ISO 15552 cylinder, match the 80mm bore, 25mm stroke, PT3/8 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2. The 25mm stroke is short enough that side-loading is minimal, but always ensure external guides carry any lateral load.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke over a 10mm window. The effective stroke range is 15 to 25 mm. You dial in the exact end position during commissioning and lock it, so one cylinder covers that entire range without changing hardware.
Because the rod exits both ends, the force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.