verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ80X25-20

The AirTAC SEJ Adjustable Cylinder SEJ80X25-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø80mm unit covers an effective stroke of 5–25mm without changing cylinders. Force is equal in both directions.

  • BoreØ80 mm
  • Nominal stroke25 mm
  • Adjust window20 mm
  • Effective stroke5–25 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$134.89 $142.39Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ80 stroke, mounting and version on one page All SEJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ80X25-20

The AirTAC SEJ80X25-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable retract window. A stop screw on the back rod lets you dial the effective stroke from 5mm up to the 25mm nominal length, perfect for fine-tuning an exact end position during machine commissioning.

This extruded aluminum barrel design includes field-adjustable air cushions at both ends to manage deceleration over the 36mm cushion length. This SKU lacks the magnet option, so it carries no position sensor. The back rod can also serve as a guide to help resist side loads, though the overall cylinder length is longer than a fixed-stroke unit.

Airtac SEJ Adjustable Cylinder SEJ80X25-20 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ80X25-20
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ80 mm
Nominal stroke25 mm
Adjustment window20 mm (5–25 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM20×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø80mm)

PressureForce (both directions)
0.5 MPa2268 N
0.7 MPa3175 N
Max (@1.0 MPa)463 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ80X25-20

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
80Bore size in mm.
×25Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ80X25-20 Is Used

precision_manufacturing

Press Die Height Trial

Dial the 5-25mm retract window to test die closure heights on a 2268 N stamping press without swapping physical spacers.

tune

Dispenser Nozzle Alignment

Fine-tune the exact nozzle contact depth during line commissioning, locking the back-rod stop screw precisely at the fill container height.

Is the Airtac SEJ Adjustable Cylinder SEJ80X25-20 the Right Cylinder?

Confirm this 20mm adjustment window covers your required positioning range. If you need less force, the adjacent bore down is the 63mm size, providing 1402 N both ways at 0.5 MPa; if you need more, stepping up to the 100mm bore yields 3681 N both ways at 0.5 MPa. If your machine never requires stroke changes after setup, a fixed-stroke SED80X25 provides the same output in a shorter package. Remember that the adjustable cushion and stop screw decelerate the load but do not lock position on air loss; for fail-safe holding, specify a BSED or an external rod lock. For ISO 15552 replacement matching, verify the 80mm bore, 25mm stroke, PT3/8 port, and your required mounting subset (Basic, FA, LB, TC, FTC, TCM1, or TCM2).

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ80X25-20 FAQ

The stop screw on the back rod provides a 20mm adjustment window. You can mechanically dial the effective retract stroke down from the 25mm nominal length to a minimum of 5mm to match your exact machine stop position.

Because the rod exits both ends, force is equal in both directions. It delivers 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ80X25-20

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ80X25-20 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.