
The AirTAC SEJ Adjustable Cylinder SEJ80X250-100 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø80mm unit covers an effective stroke of 150–250mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X250-100 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100 mm adjustable stroke window. A rear stop screw lets you dial the retract end position down, yielding an effective stroke range of 150 to 250 mm for precise on-machine changeovers.
This SKU omits the magnet option, meaning no CMSE or DMSE position sensing is installed. The extruded aluminum barrel omits external tie rods for a clean ISO 15552 envelope.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X250-100 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 250 mm |
| Adjustment window | 100 mm (150–250 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×250 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 100 mm retract window to lower a 3175 N press head precisely onto varying stamping depths without swapping mechanical spacers.
Adjust the effective stroke from 150 to 250 mm to accommodate different carton sizes on a packaging line, using the equal both-way force for consistent folding arms.
Fine-tune the exact retracted position of a conveyor diverter gate during commissioning, locking the back-rod stop screw once the ideal 80 mm bore position is set.
This 80 mm bore provides 3175 N both-way force at 0.7 MPa. If your load is lighter, the 63 mm bore offers 1402 N at 0.5 MPa; for heavier demands, the 100 mm bore yields 3681 N at 0.5 MPa. If the exact end position is fixed and never varies, a standard SED double-rod cylinder provides the same equal-force dynamics without the adjustment hardware.
The 100 mm adjustment window is ideal for matching varying part heights during commissioning. The field-adjustable air cushion at both ends decelerates the load near stroke end but does not hold position on air loss. For fail-safe holding, an external rod lock is required. Ensure your ISO 15552 replacement matches the PT3/8 port and M20x1.5 rod thread.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
The 100 mm adjustment window allows the retract stroke to be mechanically dialed back from the nominal 250 mm down to 150 mm, providing a flexible 150 to 250 mm effective range.
Because the rod exits both ends, force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.