
The AirTAC SEJ Adjustable Cylinder SEJ80X250-40 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø80mm unit covers an effective stroke of 210–250mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X250-40 is a double-acting, double-rod ISO 15552 profile cylinder with a 40 mm adjustable stroke window, yielding an effective travel range of 210 to 250 mm. A stop screw on the back rod lets you mechanically dial in the retract position precisely during machine commissioning. Because a rod exits both ends, the annular area is identical in both directions, delivering an equal force of 2268 N each way at 0.5 MPa.
This extruded aluminum barrel design includes field-adjustable air cushions at both ends to manage deceleration near stroke extremes. It features a PT3/8 port, a 25 mm rod with an M20x1.5 thread, and operates at speeds of 30-800 mm/s. Note that this specific SKU lacks a magnet, so CMSE or DMSE position sensors cannot be used without a different option code.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X250-40 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 250 mm |
| Adjustment window | 40 mm (210–250 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×250 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 40 mm retract window to perfectly set the die gap on a 250 mm stroke press, utilizing the 2268 N both-way force to move heavy tooling.
Adjust the end point during machine commissioning to hit a precise 230 mm retract distance without swapping physical hardware on the line.
Quickly reconfigure the cylinder's effective stroke between 210 and 250 mm to accommodate different product heights in packaging equipment.
Verify the 40 mm adjustment window covers your required end-position variance. If you need less force, the adjacent 63 mm bore provides 1402 N at 0.5 MPa; stepping up to the 100 mm bore yields 3681 N at 0.5 MPa. If your travel distance never varies, a fixed-stroke SED provides the same double-rod stability without the adjustment hardware. For replacing an ISO 15552 unit, match the 250 mm nominal stroke, 40 mm window, PT3/8 port, and your required mounting from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Since the 250 mm stroke is 300 mm or greater, use external guides to prevent side-load deflection on the rod. Remember that the mechanical stop screw and air cushions only set the end position and decelerate the load; they do not hold position on air loss, so add an external rod lock for fail-safe holding.
Quick checklist
The cylinder has a 40 mm adjustment window on the retract end. You can dial the effective stroke down from the 250 mm nominal length to a minimum of 210 mm, then lock the back-rod stop screw in place.
Because the rod exits both ends, force is equal in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.