
The AirTAC SEJ Adjustable Cylinder SEJ80X250-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø80mm unit covers an effective stroke of 200–250mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X250-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output force remains equal in both directions at 2268 N each way at 0.5 MPa. You can dial the retract end from 200 mm up to the 250 mm nominal stroke, perfect for fine-tuning a mechanical stop on the machine.
This bore uses a PT3/8 port, a Ø25 mm rod with an M20x1.5 thread, and 36 mm adjustable air cushions at both ends. Because this SKU lacks the -S magnet option, it does not support CMSE or DMSE position sensors. The extruded aluminum barrel ensures ISO 15552 dimensional interchangeability without external tie rods.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X250-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 250 mm |
| Adjustment window | 50 mm (200–250 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×250 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 200-250 mm retract stop to precisely mate a 3175 N press die, fine-tuning the crush depth without swapping hardware.
Adjust the stroke window on the fly when shifting between different box heights, using the equal both-way force to push and pull the folding arms.
Set a variable mechanical stop for diverse pallet lengths, relying on the 36 mm cushions to decelerate the heavy load smoothly.
Confirm this 50 mm adjustment window covers your positioning range. If you need less force, the 63 mm bore provides 1402 N at 0.5 MPa; if you need more, stepping up to the 100 mm bore yields 3681 N at 0.5 MPa. If your end position never changes, a fixed-stroke SED avoids the adjustment mechanism.
Note that a plain SEJ does not hold position on air loss; the cushion and stop screw only set the mechanical end and decelerate near stroke end. For fail-safe holding, use an external rod lock. At 250 mm stroke, ensure external guides carry side loads to protect the Ø25 mm rod. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
The SEJ80X250-50 features a 50 mm adjustment window via a stop screw on the back rod. The effective retract stroke can be dialed from 200 mm up to the 250 mm nominal stroke, which you lock in place after setting.
Because it is a double-rod cylinder, force is equal in both directions. It provides 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.