
The AirTAC SEJ Adjustable Cylinder SEJ80X250-75S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø80mm unit covers an effective stroke of 175–250mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X250-75S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 75mm adjustable stroke window. A rear stop screw lets you dial the retract end down, yielding an effective stroke range of 175-250mm without swapping hardware.
This 80mm bore unit runs at 30-800 mm/s and includes a magnet for CMSE reed or DMSE electronic sensors. It uses adjustable air cushions at both ends to decelerate the load near stroke end. Note that this mechanical stop sets the end position but does not hold the load on air loss; for fail-safe holding, an external rod lock is required.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X250-75S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 250 mm |
| Adjustment window | 75 mm (175–250 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×250 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivers 2268N both-way force at 0.5 MPa to push blanks into a stamping press, using the 75mm window to fine-tune the feed stop for varied material thicknesses.
Adjusts the retract end across a 175-250mm range to handle different pallet heights on a packaging line, locking the back-rod stop screw precisely for changeovers.
Provides 3175N of equal push and pull force at 0.7 MPa for a conveyor divert gate, using the adjustable stroke to match variable lane widths during commissioning.
Choose this 80mm bore if your machine needs 2268N both-way force at 0.5 MPa with on-the-fly stroke tuning. If your application requires less force, the 63mm bore provides 1402N; if you need more, the 100mm bore offers 3681N. The 75mm adjustment window is ideal for commissioning fine-tuning or adapting to different part heights without machining new stops. If your stroke never varies, a fixed-stroke SED saves complexity. For ISO 15552 replacements, verify the 250mm stroke, 175-250mm window, PT3/8 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). At 250mm stroke, external guides are recommended to prevent rod side-loading.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
The 75mm window allows you to mechanically dial the retract stroke from 175mm up to 250mm. You set the exact end position via a stop screw on the back rod and lock it in place on the machine.
Because the rod exits both ends, force is identical in both directions. It delivers 2268N at 0.5 MPa, 3175N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.