
The AirTAC SEJ Adjustable Cylinder SEJ80X40-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø80mm unit covers an effective stroke of 20–40mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X40-20S is a double-acting, double-rod ISO 15552 profile cylinder with a 20mm adjustable stroke window. You can dial the retract end from 20mm up to 40mm to perfectly match a mechanical stop. Because a rod exits both ends, the annulus area is symmetrical, yielding equal force and speed in both directions at 2268 N each way at 0.5 MPa.
This extruded aluminum barrel design omits external tie rods and includes field-adjustable air cushions at both ends to manage deceleration. The integrated -S magnet supports CMSE reed and DMSE electronic sensors for precise end-position detection.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X40-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 40 mm |
| Adjustment window | 20 mm (20–40 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×40 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivering 2268 N both ways at 0.5 MPa, dial the 20mm retract window to perfectly time the feed stroke on a sheet metal press without swapping hardware.
Adjust the effective 20-40mm stroke on the fly to accommodate different pallet thicknesses in a packaging line, utilizing the 3175 N both-way force for secure lifting.
Use the double-rod symmetry for identical push and pull speed when setting an adjustable workpiece stop on a CNC milling conveyor, locking the back-rod screw after positioning.
This 80mm bore yields 2268 N both ways at 0.5 MPa, making it ideal for medium-force positioning. If your application requires less force, the 63mm bore provides 1402 N. For heavier changeover tasks, stepping up to the 100mm bore offers 3681 N. If you do not need to fine-tune the end position on the machine, a fixed-stroke SED cylinder is a simpler alternative.
When replacing an ISO 15552 cylinder, match the 80mm bore, 40mm nominal stroke, 20mm adjust window, PT3/8 port, and your specific mounting option. Note that the air cushion and mechanical stop screw only decelerate the load and set the end position; they do not hold position on air loss. For fail-safe holding, use an external rod lock.
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke over a 20mm window. The effective stroke range is 20mm to 40mm. You dial it in during commissioning and lock it to set the exact end position.
Because the rod exits both ends, force is identical in both directions. It provides 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.